What size wrench do you need to remove the big hex nuts that hold the rockshaft arms on the Super A (and others) Touch Control? Biggest wrench I have is 1 5/16" and it is too small.....
thanks,
Al
Big Hex Nuts on Super A Touch Control Arms?
Moderator: Team Cub
10 posts
• Page 1 of 1
Big Hex Nuts on Super A Touch Control Arms?
by Super A » Wed May 09, 2012 4:14 pm
"12 volt conversions are for quitters"
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
-
Super A - 501 Club
- Posts: 3035
- Joined: Mon Jan 26, 2004 10:53 am
- Location: NC, Jacksonville area
- Zip Code: 28521
- Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk 
- Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by Jim Becker » Wed May 09, 2012 4:33 pm
You need one of these.
http://www.harborfreight.com/6-inch-utility-caliper-7914.html
http://www.harborfreight.com/6-inch-utility-caliper-7914.html
-
Jim Becker - Team Cub
- Posts: 11266
- Joined: Sun Feb 02, 2003 3:14 pm
- Location: TX
- Zip Code: 75048
- Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by Dale Finch » Wed May 09, 2012 4:50 pm
JIM!!! You are SO mean!
Al, you might as well buy a set of LARGE combination wrenches...I have used mine ALL the time! I also have a VERY LARGE adjustable "Crescent" wrench, a set of LARGE sockets, as well as a LARGE pipe wrench. I can't remember where I got all of them...some from Agri-Supply. Of course, (being a GIRL) I always had available my 3' pipe for added leverage!
Al, you might as well buy a set of LARGE combination wrenches...I have used mine ALL the time! I also have a VERY LARGE adjustable "Crescent" wrench, a set of LARGE sockets, as well as a LARGE pipe wrench. I can't remember where I got all of them...some from Agri-Supply. Of course, (being a GIRL) I always had available my 3' pipe for added leverage!
Dale Finch
-
Dale Finch - 501 Club
- Posts: 1058
- Joined: Tue Apr 27, 2010 11:34 am
- Location: NC, Chapel Hill
- Zip Code: 27517
- Tractors Owned: '55 Cub "Bertha"
'52 Cub "Bobbie"
'48 Super A "Bubba"
'48 Super A (parting out) - Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by Boss Hog » Wed May 09, 2012 5:01 pm
I believe it is 1 and a half inch
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
Boss Hog - Cub Pro
- Posts: 8976
- Joined: Mon Oct 24, 2005 8:35 pm
- Location: VA. Randolph
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by Super A » Wed May 09, 2012 6:14 pm
Boss Hog wrote:I believe it is 1 and a half inch
Thanks Dale and Boss for info I can use....
I keep adding big wrenches to my toolbox. I got this nice Craftsman set for Christmas, starts at 15/16 IIRC and goes to 1 5/16. I have always wanted a nice 3/4" drive socket set but I'm too cheap to take the plunge. Will check Sears this weekend. (I'm partial to Crapsman even though I know I'm mainly buying a brand!
Al
"12 volt conversions are for quitters"
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
-
Super A - 501 Club
- Posts: 3035
- Joined: Mon Jan 26, 2004 10:53 am
- Location: NC, Jacksonville area
- Zip Code: 28521
- Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk - Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by twotone » Wed May 09, 2012 6:49 pm
I just measured mine with a socket-1 7/16
Aim Low, Acheive Your Goals.
Tom
Tom
-
twotone - 501 Club
- Posts: 778
- Joined: Sat May 14, 2011 6:09 pm
- Location: Versailles,Pa.
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by Barnyard » Wed May 09, 2012 6:49 pm
Jim Becker wrote:You need one of these.
http://www.harborfreight.com/6-inch-utility-caliper-7914.html
Or a tape measure!
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
-
Barnyard - Team Cub
- Posts: 15756
- Joined: Tue Aug 07, 2007 3:39 pm
- Location: OH, New Haven (Hamilton County)
- Zip Code: 45030
- Tractors Owned: At This Time
32 Farmall Cubs (Round Hood)
1 Farmall Cub (Square Hood)
2 IH Cubs 9Square Hood
4 Lo-Boys (Round Hood)
1 Lo-Boy (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by Jim Becker » Wed May 09, 2012 8:07 pm
Super A wrote:Thanks Dale and Boss for info I can use....
Sorry. I didn't think I needed to add more detail. Maybe this will help.
-
Jim Becker - Team Cub
- Posts: 11266
- Joined: Sun Feb 02, 2003 3:14 pm
- Location: TX
- Zip Code: 75048
- Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by Dale Shaw » Wed May 09, 2012 8:25 pm
Dale Shaw
TN Cub Rescue- Out of the Hedgerows and Barns, and back into the Fields and Gardens where they belong.
Today's generation is so used to getting everything IN a box, they can't think OUTSIDE the box
TN Cub Rescue- Out of the Hedgerows and Barns, and back into the Fields and Gardens where they belong.
Today's generation is so used to getting everything IN a box, they can't think OUTSIDE the box
-
Dale Shaw - 501 Club
- Posts: 6387
- Joined: Tue Jan 29, 2008 10:56 pm
- Location: Tn, Crossville
- Zip Code: 38571
- eBay ID: shad3js
- Tractors Owned: 49 cub Elmo
55 cub
79 cub
151 disc plow
152 disc plow
cultivators
cub 6 toolbar
193 plows - Circle of Safety: Y
Re: Big Hex Nuts on Super A Touch Control Arms?
by Super A » Wed May 09, 2012 9:50 pm
twotone wrote:I just measured mine with a socket-1 7/16
Thanks twotone. I appreciate the willingness to help!
Dale S---if I get chance to work on it before the weekend, I will talk to one of my buddies and borrow one of his--he routinely hauls more tools around in his farm truck than the Snap-On truck has!
Al
"12 volt conversions are for quitters"
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
-
Super A - 501 Club
- Posts: 3035
- Joined: Mon Jan 26, 2004 10:53 am
- Location: NC, Jacksonville area
- Zip Code: 28521
- Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk - Circle of Safety: Y
10 posts
• Page 1 of 1
Return to Farmall A, Super A, AV
Who is online
Users browsing this forum: No registered users and 0 guests
|
|