IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
7 posts • Page 1 of 1
i now have a cub 184 with a broken crank.
i can't seem to find one.
will an early crank work, or be made to work in this motor.
from what i can tell internally it looks identical to the c60 in my farmall cub.
exterior pulley and flywheel look different.
the main shaft running from the clutch to the tranny could be improoved upon.
im haveing a time finding this part also..
any source recommendations ?
Check with HamiltonBobsCubs, sponsor with link at the bottom of the page. If it's not listed in their catalog, I'd suggest giving them a call.
"We don't need to think more,
we need to think differently."
I just finished the same project on my 184 last fall. Crank broke just behind the #4 journal.
Might want to check out what I found as a root cause.
HamiltonBobsCubs has the best prices (and service) on crankshafts for the 154/184. I would purchase a crank from a 154 or 184 rather than the farmall cub. They might be the same, but why gamble if cranks are available.
If the driveshaft splines are worn then you will also need to replace the clutch. Driveshafts are available from a dealer, but only for a 184 without a creeper. If you have a creeper then you have to buy the longer driveshaft from the dealer and then have it shortened and turned down to fit. Take your original driveshaft to the machine shop so they can use it as a template.
Buy your clutch plate from HamiltonBobsCubs because the price at the dealer just increased significantly.
184 w/ Creeper & 3-Point
IH Model 15 Tiller
the crank in my 184 also broke after #4 rod just prior to the rear main..
as my other cub has never failed, im wondering if there are imposed stresses when the cast torque tube was ditched in favor of the sheet steel consturction ?
i have no idea what the 184 was been thru in its life, but i have worked the snot out of my earier cub...
7 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests