Needle valves and seats to the Bash

The new home for CubFest and Tractor show Announcements & Discussions.

Moderator: Team Cub

Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.

IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.

Needle valves and seats to the Bash

Postby Bob McCarty » Tue May 22, 2012 6:44 pm

I was measuring some old ones this afternoon. To my surprise, I found three different ID's on the seats, and two OD's on the needles. Enough difference that they are not interchangeable. If you have some old ones and are attending the Bash, please bring them so I can measure them. It may not clarify anything, but I've been in a state of confusion most of my life anyway. :lol:

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
 
Posts: 5638
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Re: Needle valves and seats to the Bash

Postby Barnyard » Tue May 22, 2012 6:50 pm

Bob McCarty wrote:but I've been in a state of confusion most of my life anyway.

Bob

So that's why I am still finding things you hid at the bash last year! :shock:
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17873
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Needle valves and seats to the Bash

Postby Boss Hog » Tue May 22, 2012 7:20 pm

I will try to round up some
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9805
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Needle valves and seats to the Bash

Postby Mr E » Tue May 22, 2012 8:04 pm

Barnyard wrote:
Bob McCarty wrote:but I've been in a state of confusion most of my life anyway.

Bob

So that's why I am still finding things you hid at the bash last year! :shock:


All of us that have hosted a Fest have a special appreciation for this statement. :lol: :lol:
In the middle of every difficulty lies opportunity. - Albert Einstein


Roy Edenfield
Deep South CubFest
February 13 & 14, 2015
User avatar
Mr E
5+ Years
5+ Years
 
Posts: 5384
Joined: Mon Jul 30, 2007 11:48 am
Location: FL, Sneads
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety Award
Circle of Safety: Y

Re: Needle valves and seats to the Bash

Postby sdurnal » Wed May 23, 2012 6:11 am

Bob, I have a new one from a TSC kit that has a viton tip, if it will do you any good. (After reading the comments about them, I re-used the old one) Can't explain why I kept it.. Just did..
Regards,
User avatar
sdurnal
501 Club
501 Club
 
Posts: 745
Joined: Thu May 06, 2010 1:36 pm
Location: IN, Columbus
Zip Code: 47201
Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)

680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow
Circle of Safety Award
Circle of Safety: Y

Re: Needle valves and seats to the Bash

Postby Denny Clayton » Wed May 23, 2012 8:38 am

sdurnal wrote:Bob, I have a new one from a TSC kit that has a viton tip, if it will do you any good. (After reading the comments about them, I re-used the old one) Can't explain why I kept it.. Just did..
Regards,

In case you needed it later..............if you can find it. :shock: :lol:
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
User avatar
Denny Clayton
10+ Years
10+ Years
 
Posts: 3674
Joined: Wed Feb 05, 2003 1:18 pm
Location: OH, Sidney
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety Award
Circle of Safety: Y

Re: Needle valves and seats to the Bash

Postby sdurnal » Wed May 23, 2012 10:17 am

Me thinks you speak from experience, Denny! hehe cya soon..
User avatar
sdurnal
501 Club
501 Club
 
Posts: 745
Joined: Thu May 06, 2010 1:36 pm
Location: IN, Columbus
Zip Code: 47201
Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)

680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow
Circle of Safety Award
Circle of Safety: Y


Return to CubFest and Tractor Show Announcements & Discussions

Who is online

Users browsing this forum: No registered users and 2 guests