This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Fenders

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
PAUL G
10+ Years
10+ Years
Posts: 5
Joined: Wed Mar 16, 2005 5:17 pm
Location: Florida

Fenders

Postby PAUL G » Fri Jul 29, 2005 7:43 pm

Are the fenders and mounting hardware from model 70 and 100 the same as for the Original 1961 model :?:

Thank You Paul
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
wdeturck
10+ Years
10+ Years
Posts: 949
Joined: Mon Dec 08, 2003 6:15 am
Location: PA Oakmont 15139

Postby wdeturck » Sat Jul 30, 2005 12:58 pm

Paul G: The 70 & 100 have 2 mounting plates and brackets that mount around the axle housing. The Original has a pan between the fenders and uses the seat spring holes to mount it. There is also a stabilizer rod that is in between the fenders. The fenders are made the same but have different mounting holes and the 70/100 have a lip on the bottom that the axle bracket mounts to. I have seen 70/100 fenders on Originals and original fenders on the 70/100.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
Top
Paul B
10+ Years
10+ Years
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Zip Code: 40218
Circle of Safety: Y
Location: KY, Louisville

Postby Paul B » Sat Jul 30, 2005 6:22 pm

The inner skirt of the fender is shaped different, they mount different, and they will not readly interchange between models. But as William said, some people have switched them between models, but normally the fit leaves a lot to be desired. The skirt of the Original fenders is not deep enough and does not have the lip/flange along the bottom to fasten the axle straps that are used on the 70/100. If you use the Original mounting pan, the fenders sit too high, unless they are modified.
Top
Post Reply

Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 8 guests