This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Two-cycle weed trimmer

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Bus Driver
10+ Years
10+ Years
Posts: 2917
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Two-cycle weed trimmer

Postby Bus Driver » Thu May 24, 2012 6:54 pm

While I have understood the principles of the two-cycle engine for well over 60 years, some of the parts of the engines have been baffling. But I continue to learn and improve my abilities with them. Just repaired, by myself, a couple of them donated to me by frustrated owners. My favorite two-cycle mechanic, much younger than me, has a serious chronic disease plus a drinking problem plus hanging out with "bad friends" which all adds up to being mostly unavailable lately. But he will take a few minutes to offer advice.
I suspect that regulations will eliminate most two-cycle engines in the not-too-distant future. But for string trimmers, I do not think the 4-cycle is the best choice even though I have not used one. The 4-cycle has a crankcase and certainly depends on gravity to keep the oil in the proper place in the sump. I have not looked inside one of those engines. But the many positions in which trimmers are used leads me to believe that some positions would starve the engine for oil. Some comments from users support that notion. But i could be wrong.
Anyone ever used a 4-cycle trimmer?
Luck favors those who are prepared

SPONSOR AD

Sponsor



Sponsor
 

User avatar
ricky racer
10+ Years
10+ Years
Posts: 6315
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: Two-cycle weed trimmer

Postby ricky racer » Thu May 24, 2012 8:48 pm

Bus Driver wrote: The 4-cycle has a crankcase and certainly depends on gravity to keep the oil in the proper place in the sump. I have not looked inside one of those engines. But the many positions in which trimmers are used leads me to believe that some positions would starve the engine for oil. Some comments from users support that notion.


Not if it runs on pre-mix.

http://www.stihlusa.com/whatsnew/news_fourmix.html

http://www.youtube.com/watch?v=eWZfRdm9u9c
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

User avatar
Bus Driver
10+ Years
10+ Years
Posts: 2917
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: Two-cycle weed trimmer

Postby Bus Driver » Fri May 25, 2012 5:47 am

Interesting. Mixed fuel is still required. Says it meets emission standards. The Ryobi I looked at had the crankcase oil fill plug as expected for 4-stroke engines.
Luck favors those who are prepared

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Two-cycle weed trimmer

Postby John *.?-!.* cub owner » Fri May 25, 2012 7:51 am

Considering the small engines are normally splash lubricated with no pump, I expect the trimmers take that into account, and the the crankcase narrow enough, and oil is deep enough for it to get slung all over the place in most any position.
If you are not part of the solution,
you are part of the problem!!!

User avatar
sdurnal
10+ Years
10+ Years
Posts: 923
Joined: Thu May 06, 2010 1:36 pm
Zip Code: 47201
Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)

680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow
Circle of Safety: Y
Location: IN, Columbus

Re: Two-cycle weed trimmer

Postby sdurnal » Fri May 25, 2012 9:38 am

Here's some experiences from my "other" hobby. We've been using 2 cycle string trimmer and chainsaw engines in R/C aircraft for nearly 2 decades. (giant scale) We fly inverted, stalls, and every imaginable position without difficulty. Then the four strokes appeared, and immediately grabbed attention due to it's sweet sound. However, it was found that they were heavier and produced less HP than their 2 cycle counterparts. When flown inverted, and vertical, they did not have the lifespan, due to lack of lubrication.
Weight and dependability are big issues when It comes to planes which sometimes have 8 - 10+ ft wingspan. These things will hover. Personally, I perfer my planes not to sound like a chainsaw, so I don't do "gassers" and stick to 4 cycle "glow"engines without a sump. (Giant Scale is 80"+ wingspan) I believe the sump on a string trimmer is engineered to be adequate for any position you should find yourself, as long as used for a trimmer. (Just like John indicated)
Ricky's link about Stihl's "sumpless" may now give us another option, as "glow fuel" is $15.00 a gallon... Thanks
(I've been slacking off a bit from the aircraft since I became interested in Cubs...hehe)
Regards,
Stan

Jim Becker
Team Cub
Team Cub
Posts: 17241
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Two-cycle weed trimmer

Postby Jim Becker » Fri May 25, 2012 5:22 pm

I would think that anyone clever enough to keep the fuel flowing when an engine is turned to odd positions should be clever enough to keep oil flowing in the same positions.

User avatar
Boss Hog
Cub Pro
Cub Pro
Posts: 10290
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: Two-cycle weed trimmer

Postby Boss Hog » Fri May 25, 2012 7:31 pm

Hard to beat a Stihl 110 we run them at work and I use them at home 4 stroke and handlebars , straight shaft.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
sdurnal
10+ Years
10+ Years
Posts: 923
Joined: Thu May 06, 2010 1:36 pm
Zip Code: 47201
Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)

680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow
Circle of Safety: Y
Location: IN, Columbus

Re: Two-cycle weed trimmer

Postby sdurnal » Fri May 25, 2012 8:41 pm

The fuel systems are pretty simple in airplanes. The tank has a "clunk" which is attached to the carb. In glow engines, most have a pressure tap directly into the exhaust and keep the tank pressurized. (a few have pumps that work off vacuum pulse or crankshaft) For gassers, it's just like a string trimmer...diaphram pump in carb. (maybe an additional pressure tap into the exhaust if needed) Lubrication on the other hand may require a gear driven pump and tank like some race cars. (with a clunk inside) A lube tank would add more weight than most builders would tolerate. It's all HP vs weight with the contests. The way some are flown, one sputter at the wrong time makes the difference between landing or going home with a trash bag full of balsa & fiberglass. (sorry to drift off subject) I will be looking into the sumpless 4 strokes for a future build...
I've made the "walk of shame" to the crash site with a trash bag a number of times... Oh well...
Regards,

Sorry for running on, Bus Driver....

User avatar
ricky racer
10+ Years
10+ Years
Posts: 6315
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: Two-cycle weed trimmer

Postby ricky racer » Fri May 25, 2012 9:12 pm

You know sdurnal, if you've got some pictures of your planes, I'd like to see them. :{_}:
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

User avatar
sdurnal
10+ Years
10+ Years
Posts: 923
Joined: Thu May 06, 2010 1:36 pm
Zip Code: 47201
Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)

680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow
Circle of Safety: Y
Location: IN, Columbus

Re: Two-cycle weed trimmer

Postby sdurnal » Sat May 26, 2012 7:29 pm

I think that can be arranged... lol I should be able to scare some up. I'll have to upload from work, as my home system is a bit slow for pics..
Regards,
Stan

outdoors4evr
10+ Years
10+ Years
Posts: 2784
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Re: Two-cycle weed trimmer

Postby outdoors4evr » Fri Jun 29, 2012 11:05 am

Agree with SDurnal. They are getting some amazing horsepower out of lightweight 2-cycle engines. A 5 HP engine is now smaller than a weed-eater engine. (note: 5HP can run your push style lawnmower)
The new ones use VERY LITTLE oil. The airplanes mix 80:1 or 120:1 and use high quality lubricants in the fuel.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 17446
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Two-cycle weed trimmer

Postby Don McCombs » Fri Jun 29, 2012 2:01 pm

I have a Troybilt 4 cycle string trimmer. No mixing. It doesn't get the rpm's of a two cycle, but otherwise I've had no problems.
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor


Return to “Other Tractors and Machinery”

Who is online

Users browsing this forum: No registered users and 3 guests