This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Throttle/Governor stuck/won't move
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Throttle/Governor stuck/won't move
When I move the throttle I see the rod bend so I stop before I really bend the rod, but I can't get it to move freely. Where do I need to start and what is most common problems on the governors ???? The linkage from carb to gov moves though but not sure if thats a good thing or not.
-
- Team Cub Mentor
- Posts: 5641
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Throttle/Governor stuck/won't move
The lever on the top of your governor, the one the linkage rod attaches to, is rusted at the pivot and seized up, a very common problem. Liberally lube it with a good penetrating oil, then start carefully working it. I say carefully, because the lever is not that hard to break. Once you get it freed up, it's a good idea to remove it, clean the lever & pivot pin and apply grease before reinstalling.
-
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Re: Throttle/Governor stuck/won't move
Would I be better off removing the whole governor to do this??? and is there any info about removal and installing the gov in the manuals ??? All I see in the owners about them is they say they are set @ the factory and should be adjusted by IH... I need a repair manual guide (like Chilton or Haynes) is IH-50 manual in the manuals section what I'm looking for ??? Do I realy need to remove the distributor also ? Can I tell if everything is in working order on it WITHOUT removing it ???
PS TY all for the help AND the manuals
PS TY all for the help AND the manuals
-
- 10+ Years
- Posts: 1421
- Joined: Sun Apr 30, 2006 2:54 pm
- Zip Code: 60073
- Circle of Safety: Y
- Location: IL, Round Lake Heights
Re: Throttle/Governor stuck/won't move
You don't need to remove the governor or the distributor - in fact, it would be better if you didn't, so you don't have to worry about getting the governor back in correct time.
I do recommend taking the hood off (despite the additional work that can engender ). I don't remember if the alternator has to be moved. If it does, you won't have to remove it altogether, just loosen it up, slip the belt off, and swing it to the outside to get it out of the way.
You shouldn't really need a service manual for this task, but if you want to peruse one, it will be one of the one's under the "blue ribbon service manuals" link on the manual site.
To remove the hood, take off the air cleaner cap and the gas cap, loosen four bolts (7/16 - they do not have to come all the way out, just enought to slip the grill off) on the doglegs to remove the grille, remove one bolts (1/2) on either side of the radiator at the top of the side supports, remove the two screws at the top of each dogleg, and the four bolts (7/16 again) securing the gas tank to the top of the dash. I usually unclip the starter rod from the switch so I can slide it out of the way to remove the rightmost of the dash bolts so I don't inadvertently "bump" the starter over. It's easier to have two people, one on each end (or each side) of the hood to remove it, but if the gas tank is empty or nearly so, one person can handle it.
Once you have the hood off, you will see the lever (actually a bell-crank) that the speed control links to. There will be a spring attached to the other arm of the lever. Pull the cotter pin from the end of the speed control rod, and the cotter pin (I think it's held on by a cotter pin - it's been a while since I had to do this to mine) from the spindle holding the lever, then dose it with your favorite penetrating oil. Let it sit a bit, then tap gently on one end of the lever to try to get it to rotate around the spindle. If it doesn't rotate right away, dose it again, and let it sit a while. Repeat as necessary, until the lever starts to move (this may take a few days). Once it starts to move, you can start to persuade it to slide off the spindle. You should be able to get enough slack in the spring that you can slide it off without disconnecting the spring first. It is a very stiff little bugger!
Once you have the lever off the spindle, as the others suggested, clean off the spindle and the pivot hole in the lever (I think I was able to use a battery cable brush), slather the spindle with grease, reattach the spring (very important to do it now, as I said, she is the very devil to try to connect when the lever is already on the spindle, and slide the lever back on.
As they say in the British shop manuals, from here "reassembly is the reverse of disassembly.
Break a leg, and let us know how you get on.
I do recommend taking the hood off (despite the additional work that can engender ). I don't remember if the alternator has to be moved. If it does, you won't have to remove it altogether, just loosen it up, slip the belt off, and swing it to the outside to get it out of the way.
You shouldn't really need a service manual for this task, but if you want to peruse one, it will be one of the one's under the "blue ribbon service manuals" link on the manual site.
To remove the hood, take off the air cleaner cap and the gas cap, loosen four bolts (7/16 - they do not have to come all the way out, just enought to slip the grill off) on the doglegs to remove the grille, remove one bolts (1/2) on either side of the radiator at the top of the side supports, remove the two screws at the top of each dogleg, and the four bolts (7/16 again) securing the gas tank to the top of the dash. I usually unclip the starter rod from the switch so I can slide it out of the way to remove the rightmost of the dash bolts so I don't inadvertently "bump" the starter over. It's easier to have two people, one on each end (or each side) of the hood to remove it, but if the gas tank is empty or nearly so, one person can handle it.
Once you have the hood off, you will see the lever (actually a bell-crank) that the speed control links to. There will be a spring attached to the other arm of the lever. Pull the cotter pin from the end of the speed control rod, and the cotter pin (I think it's held on by a cotter pin - it's been a while since I had to do this to mine) from the spindle holding the lever, then dose it with your favorite penetrating oil. Let it sit a bit, then tap gently on one end of the lever to try to get it to rotate around the spindle. If it doesn't rotate right away, dose it again, and let it sit a while. Repeat as necessary, until the lever starts to move (this may take a few days). Once it starts to move, you can start to persuade it to slide off the spindle. You should be able to get enough slack in the spring that you can slide it off without disconnecting the spring first. It is a very stiff little bugger!
Once you have the lever off the spindle, as the others suggested, clean off the spindle and the pivot hole in the lever (I think I was able to use a battery cable brush), slather the spindle with grease, reattach the spring (very important to do it now, as I said, she is the very devil to try to connect when the lever is already on the spindle, and slide the lever back on.
As they say in the British shop manuals, from here "reassembly is the reverse of disassembly.
Break a leg, and let us know how you get on.
Michael Cummings
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
-
- 10+ Years
- Posts: 283
- Joined: Thu Jul 30, 2009 3:33 am
- Zip Code: 55733
- Tractors Owned: 1949 FCUB
- Location: MN, Esko - just West of Duluth
Re: Throttle/Governor stuck/won't move
Time and a lot of penetrating oil fixed mine some time ago and it has been free ever since. I did "work" it a bit and did some (very) light tapping right at the pivot. Didn't have to take off the hood.
Randy
Machinist since 1973
15 years in the toolroom with Tool & Die Maker experience
Machinist since 1973
15 years in the toolroom with Tool & Die Maker experience
-
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Re: Throttle/Governor stuck/won't move
been spraying P B Blaster on it for a week n still nothing, I'm thinking of removing the cotter pin n washer that hold it on the shaft n then with a piece of hardwood n hammer try knocking it like I'm removing it n if it moves I'm sure I can free it up from there but that same piece is broken on parts tractor or I'd have been a little more aggressive on it. But without a backup I'm scared to get wild on cast iron n snap the tall part where the throttle rod goes in it...
-
- 10+ Years
- Posts: 855
- Joined: Fri Dec 30, 2011 6:09 pm
- Zip Code: 39401
- Tractors Owned: 1950 Super A
1955 John Deere 60 (sold)
1950 Cub (sold) 1950 Cub l59 woods belly mower (sold)
1951 Cub (sold) 1950 Cub w/ 5' sicklebar (sold)
Tufline 6' disc (old heavy pull type)
1953+ A-295A 2 furrow SlatWing Plow Chief plow (SA)
1950 cub-193 1 furrow SWPC plow (cub) (sold)
6' home made bush hog. Mounts on drawbar - Circle of Safety: Y
Re: Throttle/Governor stuck/won't move
been spraying P B Blaster on it for a week n still nothing, I'm thinking of removing the cotter pin n washer that hold it on the shaft n then with a piece of hardwood n hammer try knocking it like I'm removing it n if it moves I'm sure I can free it up from there but that same piece is broken on parts tractor or I'd have been a little more aggressive on it. But without a backup I'm scared to get wild on cast iron n snap the tall part where the throttle rod goes in it...
-
- Cub Pro
- Posts: 5238
- Joined: Sat Sep 08, 2007 3:49 pm
- Zip Code: 25271
- eBay ID: yogiefisher
- Tractors Owned: 37 John Deere A
63 Farmall Cub
53 Farmall Cub
56 Farmall Cub
IH 140
Massey 165 & 250 - Circle of Safety: Y
- Location: WV. Ripley
Re: Throttle/Governor stuck/won't move
Go easy at it, they do brake easy. Try moving it in the direction it rotates, tapping it side to side will probably brake it for sure.
After a weeks soaking and no movement I'd go ahead and remove the hood and come in from the top at it.
After a weeks soaking and no movement I'd go ahead and remove the hood and come in from the top at it.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
Ben Franklin
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Throttle/Governor stuck/won't move
BD:
Here is the parts breakdown so you can see what needs to be done where.
As mentioned you do not need to remove the distributor or the governor, in fact if you don't have to don't .. that simple. In answer to your basic question, the Manual Server has all that you need on it. The GSS-1411 Service Manual for Cubs and Lo-boy Tractors is the IH Service Technician's reference which has been compiled from the previous GSS series of Service Manuals that are also on the server. They sure beat the IH-50 which to my mind is very limited much like Chiltons or a Haynes that are more cursory than in depth. The BRSM's are the ones to use.
Take the hood off - much easier that way and you get good visual and physical access to the linkages. Pay attention to all the connection points .. lube those very well with PB Blaster or any good penetrating oil. Do not use WD-40 .. it isn't a penetrating oil at all. It took a long time to get that gunk in there, it will take time to get it out. You don't want to be banging on those cast parts with a hammer period Sometimes patience is the key.
Here is the parts breakdown so you can see what needs to be done where.
BullDAWG wrote:All I see in the owners about them is they say they are set @ the factory and should be adjusted by IH... I need a repair manual guide (like Chilton or Haynes) is IH-50 manual in the manuals section what I'm looking for ???
As mentioned you do not need to remove the distributor or the governor, in fact if you don't have to don't .. that simple. In answer to your basic question, the Manual Server has all that you need on it. The GSS-1411 Service Manual for Cubs and Lo-boy Tractors is the IH Service Technician's reference which has been compiled from the previous GSS series of Service Manuals that are also on the server. They sure beat the IH-50 which to my mind is very limited much like Chiltons or a Haynes that are more cursory than in depth. The BRSM's are the ones to use.
Take the hood off - much easier that way and you get good visual and physical access to the linkages. Pay attention to all the connection points .. lube those very well with PB Blaster or any good penetrating oil. Do not use WD-40 .. it isn't a penetrating oil at all. It took a long time to get that gunk in there, it will take time to get it out. You don't want to be banging on those cast parts with a hammer period Sometimes patience is the key.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 4
- Joined: Sat Jan 12, 2013 12:36 pm
- Zip Code: 28120
- Tractors Owned: 1961 Cub
Cub 189 Two Way Plow
Snow Plow
King Spring Tooth Cultivator
John Blue Model BY Stalk Cutter
Buzz Saw
Cultivator Set with Fertilizer Dispenser
Re: Throttle/Governor stuck/won't move
Had same problem with my newly purchased 61 Cub. A couple of weeks of PB Blaster applications fixed it. Thanks to all the posters for the good advise.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7
- 468
-
by waynemo
Wed Jul 06, 2022 12:06 pm
-
- 1
- 105
-
by staninlowerAL
Wed Aug 10, 2022 4:51 pm
-
- 7
- 422
-
by MontanaMan
Tue Feb 21, 2023 7:14 pm
-
- 5
- 261
-
by Magnum
Sat Mar 11, 2023 9:33 am
-
- 11
- 350
-
by Eugene
Mon May 31, 2021 8:32 am
Who is online
Users browsing this forum: No registered users and 7 guests