BN running fine

Farmall B & BN Tractors, 1939-1947

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

BN running fine

Postby Phillip W. Lenke » Mon Aug 01, 2005 7:23 am

Thanks to all that helped in assisting me with my engine problems. I thought I had.
First , engine kept missing and no smooth low idle,Second , low oil pressure after warming up. Third , engine shutting down after running about a half an hour or so.
Well , I replaced FM 483 with a H4 rebuilt by Magmaster, Jon.Great job. Idles smoothly and no missing. Still had problems with oil pressure dropping below range. Thought it might be bearings. My father -in law came over Sat. Went through things . It did'nt make sense that if oil pressure dropped engine did'nt tie up (Thank God)
So I took my oil pressure indicator off my cub and guess what, Bad oil pressure guage. Duh! Checked compression wet and dry tested good suppose to be 95 psi , checked 90psi with little or no variation between cylinders. Next, cut out of engine after a half hour running time. ran engine for a while then it quit ,on que. We removed fuel drain on the carb. no fuel. So it took old line off, Steel and rubbler combo. bent a new one with all steel had good fall on it ,completely cleaned tank and put fresh fuel in it. Runnin like a champ.
My oldest son pulled trees up to cut for firewood for about an half hour. I mowed for about an hour. only problem encountered was two things. One ,that belt came off , separate issue and two, did'nt have any more work to do with it.

Again Thanks to all that helped with this , Now GREAT RUNNING 1945 BN
Keep up the good work!
Last edited by Phillip W. Lenke on Mon Aug 01, 2005 9:47 am, edited 2 times in total.
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Postby Bigdog » Mon Aug 01, 2005 7:32 am

We need some pictures Phil!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23814
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby Phillip W. Lenke » Mon Aug 01, 2005 7:35 am

Ok I'll submit first shot when I got it to where it is at this time. Hoping to take digitals of present condition. planning to replace leaking seals and painting this winter or early spring. Got My decals already , Motivation.
PWL
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Postby beaconlight » Mon Aug 01, 2005 3:39 pm

Sounds great PHIL.

Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop
User avatar
beaconlight
Cub Pro
Cub Pro
 
Posts: 7698
Joined: Thu Aug 19, 2004 2:31 pm
Location: NY Staten Island & Franklin
Zip Code: 10314

Postby Bigdog » Tue Sep 06, 2005 12:23 pm

Here are some pics from Phil's BN project"

Image

Image

Image

Image

Image
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23814
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby beaconlight » Tue Sep 06, 2005 12:37 pm

Looking great!!!!!!!

Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop
User avatar
beaconlight
Cub Pro
Cub Pro
 
Posts: 7698
Joined: Thu Aug 19, 2004 2:31 pm
Location: NY Staten Island & Franklin
Zip Code: 10314

Postby Scott » Tue Sep 06, 2005 4:37 pm

May sound dumb but whats the difference between a B and a BN
Image On To Bigger Things
User avatar
Scott
501 Club
501 Club
 
Posts: 1194
Joined: Sun Dec 26, 2004 7:09 pm
Location: MA, Rehoboth
Zip Code: 02769
eBay ID: scottdarowski
Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112

Postby Bigdog » Tue Sep 06, 2005 5:07 pm

About 8" (width)
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23814
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby Phillip W. Lenke » Thu Sep 08, 2005 4:45 am

Having not seen a Farmall B until recenty. Never realized how wide they really are, The BN really is trailer worthy.
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449


Return to Farmall B & BN

Who is online

Users browsing this forum: No registered users and 0 guests