This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Need more help--New guy here with 154 troubles
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 12
- Joined: Thu May 03, 2012 8:47 am
- Zip Code: 00000
Re: Need more help--New guy here with 154 troubles
Got the new shifter fork in and cannot figure out how to get it on. I can get it into the case, underneath the shifting rail, but I can't get it over the rail. Any advice greatly appreciated. I do not want to have to split the tractor.
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Need more help--New guy here with 154 troubles
Look at this thread. I think it explains how to do it.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=59477
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=59477
-
- 10+ Years
- Posts: 12
- Joined: Thu May 03, 2012 8:47 am
- Zip Code: 00000
Re: Need more help--New guy here with 154 troubles
I can easily slide the shifting rail back and forth, but it comes back and hits something solid. I can't move it any further. Any ideas?
-
- 10+ Years
- Posts: 12
- Joined: Thu May 03, 2012 8:47 am
- Zip Code: 00000
Re: Need more help--New guy here with 154 troubles
Got it all figured out and put back together. Gonna eat some lunch and get it all buttoned up and try it out. Hope everything works like it should.
-
- 10+ Years
- Posts: 12
- Joined: Thu May 03, 2012 8:47 am
- Zip Code: 00000
Re: Need more help--New guy here with 154 troubles
Thanks to all of your help i got it all put together and even mowed with it for about fifteen min. The only thing is at times when i try to put it in reverse it may not go until i let the clutch out a little then try again. I adjusted the clutch to where it doesnt grind going into gear now too.
I also tightened up the belt that drives the mower and it seems to mow the thicker grass a little better now.
A big thanks goes out to all that helped me here on this forum.
I also tightened up the belt that drives the mower and it seems to mow the thicker grass a little better now.
A big thanks goes out to all that helped me here on this forum.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 17 guests