This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
need help
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: need help
No problem Pat. I learned something too. I have to switch my bolts and nuts around also.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
- 10+ Years
- Posts: 13
- Joined: Wed Jun 13, 2012 11:44 pm
- Zip Code: 46304
Re: need help
Well got ram back together and put back on. Flipped caps around extended ram 16 11/16 in. Hooked up plow ran up and down about ten times. can get a 5 in one tool between bolt on stop level and cap bolt. now to order some caps (bearings). Also any ideas on how to make a stop for the ram ? Thinking maybe just wrap a chain around it so it can never over extend or find a ram that has the pin in it instead of a clip.
- twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: need help
Pat, hopefully hamiltonbob pipes up and has an answer for you. Mine just clears.
Tom
Tom
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 7 guests