Oldy and goody
Moderator: Team Cub
Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
2 posts
• Page 1 of 1
Oldy and goody
by DanR » Sat Jul 14, 2012 6:41 am
I went to NAPA for a wheel cylinder for my 23 year old Nissan. They had it the next morning. I commented that the box looked like it had been sitting on the shelf for a long time. On the cylinder was Made in the USA. A prize for sure.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1612
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
Re: Oldy and goody
by Jim Reid » Sat Jul 14, 2012 7:14 am
Dan i also had a good experince at NAPA i gave the parts man some numbers for seals and bearings for a 57-420 John Deere and he crossed them to NAPA numbers and they were made in the USA one seal was $46.00 at JD $21.99 at NAPA.
Jim
Jim
- Jim Reid
- 501 Club
- Posts: 993
- Joined: Fri Jan 30, 2004 10:51 am
- Location: East Bend,NC
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: Peter Person and 1 guest
|
|