Sun Jul 15, 2012 1:49 pm
I have a home made tractor powered by a john deere LUC engine that doesn't have a ring gear on the flywheel for a starter and was wondering if a starter generator would crank it. thanks, ron
Sun Jul 15, 2012 2:16 pm
Bit of web research says the LUC engine puts out between 12 and 15 hp.
A starter/generator cranks over the numbered Cub low-boy's and single cylinder Kohler's in the same horsepower range. So the answer is yes.
Only thing you will need to be concerned with is the rotation direction of the starter/generator. Some are clockwise and others counter clockwise.
Sun Jul 15, 2012 6:17 pm
thanks for the reply, i didn't want to buy one and then find out that i couldn't use it. ron
Sun Jul 15, 2012 7:56 pm
Might try one from a 2 cycle golf cart. they ran either way, just reversed voltage. May be cheaper than one for a lawn mower.
Mon Jul 16, 2012 8:08 am
Yes i know about the ones from a golf cart but the ones that i see advertised are more expensive than the lawn mower delcos, by the way i had bought one of ebay that came off a sears suburban for $19.99 + $11.00 shipping because i was the only bidder. The housing looked good and it spun freely. The connection on the armature post was loose and the nut was rusted on so i i took the cap off the end so i could hold the post inside to keep from twisting the wire off. When i pulled the cap off ashes fell out and the armature was blue-black from being hot.i checked it with a vom and was shorted out between the commutator and armature body. Instead of a bargain it was an expensive piece of junk. The seller had listed it as running when removed from the tractor. He only listed as giving a refund on the purchase price so i am out the shipping costs both ways. I have bought a lot of things off ebay and the items have always been as good or better than listed. He was listed as having %100 positive feedback. I was unable to try it to see if it work or not so i posted this question before buying another. thanks again, ron
Mon Jul 16, 2012 11:13 am
A lot depends on the seller. Since it was not as advertised, he may refund the original shipping, and I have known a few that also refunded your shipping under those circumstances.
Mon Jul 16, 2012 1:53 pm
I have to echo John's comment. I have had a few sellers on
do exactly that if something wasn't up to snuff or DOA. It would be worth it to at least mention it to the guy .. send along a couple pics. He may even replace it, who knows. Worth the shot.
Mon Jul 16, 2012 4:31 pm
seller grudgingly refunded the purchase price but not the shipping. He said that i dismantled it and damaged it. I filed a complaint with ebay and was refunded the initial shipping but not the cost of returning it. Had it been a matter of brushes and or bearings i wold have gladly replaced them but that thing was toast. ron
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.