Just got my quote back from CaseIH for those pivot bushings.
$70Cdn, ea. 'Ouch'!
I will be looking around to see if I can cross them and get them cheaper.
130 Axle Pivot Bushings.
Moderator: Team Cub
8 posts
• Page 1 of 1
Re: 130 Axle Pivot Bushings.
by cowboy » Fri Jul 13, 2012 8:28 am
Ouch it would be cheaper to get a piece of brass and have someone turn them out on a lathe!
Billy
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
cowboy - Cub Pro
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Location: MI, Britton
- Zip Code: 49229
Re: 130 Axle Pivot Bushings.
by EZ » Fri Jul 13, 2012 9:05 am
Billy,
That's what I am thinking at this point.
I saw the specs for those bushings on here the other day, but now I cannot find them.
I'm gonna need the outside and inside size numbers for the 2 pivots, and the 4 knuckle bushings.
Someone suggested using steel, but I'm thinking rust will not be friends with an axle pivot over time.
That's what I am thinking at this point.
I saw the specs for those bushings on here the other day, but now I cannot find them.
I'm gonna need the outside and inside size numbers for the 2 pivots, and the 4 knuckle bushings.
Someone suggested using steel, but I'm thinking rust will not be friends with an axle pivot over time.
Just Do It !
-
EZ - 501 Club
- Posts: 935
- Joined: Tue Feb 11, 2003 6:33 pm
- Location: Northern Ontario
Re: 130 Axle Pivot Bushings.
by EZ » Fri Jul 13, 2012 9:40 am
The knuckle bushings 356609R1 are available at Worthington AG (halfway between Flint and Grand Rapids.) for $11.81ea. which is not bad seeing CaseIH wants $35ea.
The pivot bushing 43455DR are not available there, or at I&T.
the quest continues.
The pivot bushing 43455DR are not available there, or at I&T.
the quest continues.
Just Do It !
-
EZ - 501 Club
- Posts: 935
- Joined: Tue Feb 11, 2003 6:33 pm
- Location: Northern Ontario
Re: 130 Axle Pivot Bushings.
by EZ » Wed Jul 18, 2012 4:55 pm
Wow...sometimes you win.
A buddy sent me an email yesterday asking me my mailing address.
Sending me a new set of pivot bushings.........no charge!
How awesome is that?
A buddy sent me an email yesterday asking me my mailing address.
Sending me a new set of pivot bushings.........no charge!
How awesome is that?
Just Do It !
-
EZ - 501 Club
- Posts: 935
- Joined: Tue Feb 11, 2003 6:33 pm
- Location: Northern Ontario
Re: 130 Axle Pivot Bushings.
by Bus Driver » Tue Jul 24, 2012 10:22 am
In the absence of other information, the pin may help develop the dimensions. Measuring the pin diameter will establish the nominal original diameter and subtracting a couple of thousandths will give the bushing bore. The pin will show the length of the bushings by the wear pattern on the pin.
Luck favors those who are prepared
-
Bus Driver - Cub Pro
- Posts: 2420
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: 130 Axle Pivot Bushings.
by EZ » Thu Aug 16, 2012 8:59 pm
Complimentary 43455DR Axle Pivot Bushings came in today.
They have a split in them. Does it matter where the split is oriented when it is installed?
They have a split in them. Does it matter where the split is oriented when it is installed?
Just Do It !
-
EZ - 501 Club
- Posts: 935
- Joined: Tue Feb 11, 2003 6:33 pm
- Location: Northern Ontario
8 posts
• Page 1 of 1
Return to Farmall 100 Series, 100, 130, 140
Who is online
Users browsing this forum: No registered users and 0 guests
|
|