How can I find out the right oils, engine, hydraulic, transmission, etc. for my Farmall 140 1961 year ?
thanks
plowhandle
correct oil (s)
Moderator: Team Cub
4 posts
• Page 1 of 1
correct oil (s)
by plowhandle » Sun Jul 29, 2012 7:04 pm
- plowhandle
- Posts: 4
- Joined: Sat Jul 21, 2012 4:04 pm
- Zip Code: 45377
Re: correct oil (s)
by Dale Shaw » Sun Jul 29, 2012 7:10 pm
IH Hytran for the hydraulics and transmission, whatever oil you use in everything else in the motor.
Dale Shaw
TN Cub Rescue- Out of the Hedgerows and Barns, and back into the Fields and Gardens where they belong.
Today's generation is so used to getting everything IN a box, they can't think OUTSIDE the box
TN Cub Rescue- Out of the Hedgerows and Barns, and back into the Fields and Gardens where they belong.
Today's generation is so used to getting everything IN a box, they can't think OUTSIDE the box
-
Dale Shaw - 501 Club
- Posts: 6370
- Joined: Tue Jan 29, 2008 10:56 pm
- Location: Tn, Crossville
- Zip Code: 38571
- eBay ID: shad3js
- Tractors Owned: 49 cub Elmo
55 cub
79 cub
151 disc plow
152 disc plow
cultivators
cub 6 toolbar
193 plows 
- Circle of Safety: Y
Re: correct oil (s)
by Brendan In NC » Tue Jul 31, 2012 11:06 pm
The 140 oils you use are IH hytran in the touch control the transmission uses 90 weight gear oil along with the rear end the engine you can use any brand of 10w30 moter oil
Tractors are like watermelons..Eat the red and throw away the green!!
Brendan Dixon Greenville NC
Tractor's 1964 Farmall Cub " Oscar " 1964 Farmall 140 " Lou "
Tractorguy140, YouTube
Brendan Dixon Greenville NC
Tractor's 1964 Farmall Cub " Oscar " 1964 Farmall 140 " Lou "
Tractorguy140, YouTube
-
Brendan In NC - Cub Star!!
- Posts: 270
- Joined: Fri Jul 29, 2011 6:54 pm
- Location: Greenville N.C
- Zip Code: 27858
- Tractors Owned: equipment :
1. IH 215 Moldboard Plow
2. 1950s IH 2 bottom plow
3. IH 144 cultivators
4. IH Side Dresser
Re: correct oil (s)
by Matt Kirsch » Fri Aug 03, 2012 12:15 pm
The right oils are listed in the owner's manual, along with the capacities and fill/check locations.
The quick answer of, "hytran in the hydraulics, SAE90 in the rear end, and your favorite engine oil in the engine" will get you started, but the manual will give you so much more.
The quick answer of, "hytran in the hydraulics, SAE90 in the rear end, and your favorite engine oil in the engine" will get you started, but the manual will give you so much more.
- Matt Kirsch
- 501 Club
- Posts: 2934
- Joined: Tue Jun 08, 2004 3:04 pm
- Location: Rochester, NY
- Zip Code: 00000
- Circle of Safety: Y
4 posts
• Page 1 of 1
Return to Farmall 100 Series, 100, 130, 140
Who is online
Users browsing this forum: No registered users and 0 guests
|
|