Farmall A 1946 model

Post your introduction and "get to know me" information in this forum.

Moderator: Team Cub

Farmall A 1946 model

Postby richardbosart » Mon Aug 06, 2012 11:54 am

I am restoring my Dad's old Farmall A that's been in storage for past 12 years. I got it running after putting in new plugs, wires, points, rotor and distributor cap last week. It's easy to crank and I won't even bother with a battery. Unfortunately the clutch seems to be stuck to the flywheel (possibly after setting up so long). Any ideas or help would be appreciated. Richard Bosart, Cuero, Texas
richardbosart
 
Posts: 9
Joined: Sun Aug 05, 2012 11:01 am
Zip Code: 77083

Re: Farmall A 1946 model

Postby John *.?-!.* cub owner » Mon Aug 06, 2012 1:22 pm

Rust will do that. Some people have had luck blocking the pedal down and spryaing brake cleaner on the clutch through the hand hole underneath.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19101
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Farmall A 1946 model

Postby Mike in Louisiana » Wed Aug 08, 2012 7:16 am

Richard, Welcome to the forum.
If you go over to the Farmall A section (viewforum.php?f=170) and re post you will get more responses.
Again welcome and have fun on this great site.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
User avatar
Mike in Louisiana
501 Club
501 Club
 
Posts: 4087
Joined: Tue Feb 15, 2005 10:10 am
Location: LA, Doyline
Zip Code: 71023
Circle of Safety Award
Circle of Safety: Y

Re: Farmall A 1946 model

Postby richardbosart » Thu Aug 09, 2012 8:48 am

Thanks John, will try that this weekend.
richardbosart
 
Posts: 9
Joined: Sun Aug 05, 2012 11:01 am
Zip Code: 77083

Re: Farmall A 1946 model

Postby richardbosart » Thu Aug 09, 2012 8:50 am

Thanks Mike, will do that. Looking forward to visiting with everyone.
richardbosart
 
Posts: 9
Joined: Sun Aug 05, 2012 11:01 am
Zip Code: 77083

Re: Farmall A 1946 model

Postby richardbosart » Tue Aug 14, 2012 10:40 am

Hey John, Thanks for the advice Regarding the 1946 Farmall A with the stuck clutch plate. I blocked the clutch pedal down on Saturday like you said to do and sprayed the brake cleaner in the housing thru the inspection hole while my wife was cranking the engine slowly and let it set a day. When I returned on Monday, I put the tractor in gear and cranked the motor over and it didn't move, so I knew it had released. I unblocked the clutch, started it up and it ran like a top. Joining the club was worth it, just to get this information. Thanks again, Richard
richardbosart Posts: 5Joined: Sun Aug 05, 2012 11:01 am
richardbosart
 
Posts: 9
Joined: Sun Aug 05, 2012 11:01 am
Zip Code: 77083


Return to Introduce Yourself

Who is online

Users browsing this forum: No registered users and 1 guest