Farmall Super A, AV, 1939 - 1954
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
6 posts • Page 1 of 1
So my Super A-1 has a popping sound that I don't know how to recognize. You can notice it more at low idle. You hear it really well at the air intake. Some of you may know right off the bat. Any Ideas? Should I be concerned?
30 second clip.
Sounds like an intake valve out of adjustment.
I would start with a complete valve adjustment and check for broken valve springs.
Hopefully it is just an adjustment thing.
Farmall Cub Ol Red # 137572 August 1951
Sometimes, I amaze myself !
If you can not learn to do it well, learn to enjoy doing it badly.
I think you need to bring it to the Dr at the Waller
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
You can't beat that offer!
'60 FH Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
Would that be Dr Boss or Dr Hog? Is valve work considered Internal Medicine?
Although I had a blast last time I was up there I think I'm going to try to tackle this myself. I've got a buddy who wants to help me. Also, after finding the section in the owners manual that covers it it doesn't look like it'll be too hard to at least adjust everything and see if that helps. But who knows I may get over my head.
Dale Finch dropped by today to take a look at it and give me some pointers. I've made a checklist of items to work on.
1) sediment bowl
2) flush/add fluid to gearbox and pto
3) clear /fix carb
4) adjust valves
5) adjust clutch (I've got very little room before it starts engaging.)
The is a pretty steady leak from the front engine seal too. I noticed it and PO told me he thought it was a leather seal that needed some time to start working correctly again. I'm not sure I buy that. We'll see I guess.
At any rate. I'm hoping to have some time to work on it soon. Things have been busy lately at work, etc. It looks like I may be being promoted to a management position. we'll see if that adds more stress or lets me goof off a little more.
Either way. I will be making time this winter to work on the tractor.
As always, thankful for this site (more so the people on it)
6 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests