Carb rebuild today!

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
clodhopper
5+ Years
5+ Years
501 Club
501 Club
Posts: 785
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50a deck
60A grader blade
Circle of Safety: Y

Carb rebuild today!

Postby clodhopper » Sat Oct 06, 2012 7:38 pm

Took the carb off of betty lou last night, took it apart, and dropped it in the cleaning can to soak. Got up this morning, rinsed it, soda blasted, washed in hot soapy water, and then commenced to installing the complete carb rebuild kit from Steiner. Made a trip up to TSC to purchase a 4' piece of 3/16" steel rod (smooth) That allowed me to make a new throttle rod (mine was almost worn in two at the throttle shaft connection) I also made a new choke rod (didn't have one, PO used a choke cable and a stay bolted to the carb. Worked good, but not original). I also used a piece of sheet metal to make a choke lever as I installed a new choke shaft, but did not have the lever. I basically folded it over, cut a slot in it, drilled a hole at the bottom of the slit that would fit over the choke shaft, and installed a bolt/nut at the top where I had folded it ove, to tighten up the slot I cut. Worked like a champ! After all this, I have the $54 in the rebuild kit, and 2.99 in the smooth steel rod plus my time, and basically its all like new now!

User avatar
Rudi
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 28707
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Re: Carb rebuild today!

Postby Rudi » Sat Oct 06, 2012 8:13 pm

Image :D Sounds like you had fun and am curious to see what you came up with for the choke lever.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
clodhopper
5+ Years
5+ Years
501 Club
501 Club
Posts: 785
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50a deck
60A grader blade
Circle of Safety: Y

Re: Carb rebuild today! update w// pics

Postby clodhopper » Sat Oct 06, 2012 9:19 pm

Rudi wrote:Image :D Sounds like you had fun and am curious to see what you came up with for the choke lever.

Here you go Rudi. I couldnt get one of the choke clamp installed. It wouldnt take in the dark. Here is a pic of the sheetmetal I used to make the clamp.
sheetmetal.jpg

Here is a first attempt at a clamp. The hole for the shaft needs to be one drill size smaller than the shaft.
chokeclamp.jpg

Heres a picture of the original throttle shaft. Its hard to see, but it was worn pretty bad.
oldrod.jpg

Here is the new rod I made from scratch.
throttlerodnew.jpg

Here is the new choke rod I made from scratch. Used a picture from TMs website as a guide.
chokerod.jpg

And finally, here is a pic of the carb reattached. Looks great and runs like champ!
carbcomplete.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
Rudi
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 28707
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Re: Carb rebuild today!

Postby Rudi » Sat Oct 06, 2012 9:26 pm

The rods look great -- nicely done. The clamp is a neat piece of using what you gots handy. Necessity if the mother of invention after all. Neat solution.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
clodhopper
5+ Years
5+ Years
501 Club
501 Club
Posts: 785
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50a deck
60A grader blade
Circle of Safety: Y

Re: Carb rebuild today!

Postby clodhopper » Sun Dec 02, 2012 1:55 pm

Also, i forgot to note that the side of the carb where the main jet screws in was slightly goofed up, enough that the brass washer would not seal it from leaking, so to correct it I used my gasket punches to cut a washer out of an old tractor tire inner tube, and placed it between the washer and the carb body. Works great, no leaks. If you look close at the last picture you can see it.

CapeCodCubs
5+ Years
5+ Years
501 Club
501 Club
Posts: 2785
Joined: Fri Jan 11, 2008 5:30 pm
Zip Code: 02747
Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
1950 F Cub Fast hitch
1965 Loboy Fast hitch

(15) FastHitch implements
tons' of cultivating and planting stuff
C-16 Cub Middlebuster
A33 Cub bean harvested
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Location: MA, Dartmouth

Re: Carb rebuild today!

Postby CapeCodCubs » Sun Dec 02, 2012 4:21 pm

Nice looking carb. Good work
Image

Bob McCarty
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 7589
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Carb rebuild today!

Postby Bob McCarty » Sun Dec 02, 2012 4:22 pm

Clodhopper, The main jet should have a fiber washer, not a brass one. It looks like you found a fix though.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Bob Perry
5+ Years
5+ Years
501 Club
501 Club
Posts: 1863
Joined: Sun Feb 22, 2009 3:30 pm
Zip Code: 02748
Tractors Owned: :

1949 Farmall Cub / FH

1951 Farmall Cub / IH mower

1964 International Cub Lo-Boy / Woods 59 mower

1967 International Cub / FH

1946 Farmall H

1949 Farmall H

a doodle bug

More than a dozen Cub Cadets running plus a few in the bone-yard

.
Location: Dartmouth, Massachusetts

Re: Carb rebuild today!

Postby Bob Perry » Sun Dec 02, 2012 4:26 pm

If I were the teacher, you'd get an "A".
REMEMBER: Keep it correct or you may face the

Image

CubitisNH
10+ Years
10+ Years
501 Club
501 Club
Posts: 565
Joined: Sun May 14, 2006 3:59 pm
Zip Code: 00000
Circle of Safety: Y
Location: Plymouth,NH

Re: Carb rebuild today!

Postby CubitisNH » Sun Dec 02, 2012 8:30 pm

Nice job on the carb and neat solution to the common"missing choke lever"problem!
Mike
How can you have too many Cubs????

User avatar
Hengy
10+ Years
10+ Years
501 Club
501 Club
Posts: 7147
Joined: Sat Feb 18, 2006 8:12 pm
Zip Code: 15101
eBay ID: lacrosseorgans
Skype Name: Mike.Hengelsberg
Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow
Circle of Safety: Y
Location: PA, Allison Park (Am Hengelsberg)

Re: Carb rebuild today!

Postby Hengy » Mon Dec 03, 2012 7:12 am

One note on the rubber inner tube washer... With the ethanol in today's gas, that rubber will wear out and fail if it get in contact with any gas. When we rebuilt Merlin's carb at the cubfest where I got him, we used a nitrile rubber o-ring in place of gasket on the carb. Worked great for about 3 years and then the rubber failed.
Mike (Happy as a Lark in Allison Park, PA)
Image Image

Check out my Restoration Thread (1955 Cub, Lewis)

User avatar
clodhopper
5+ Years
5+ Years
501 Club
501 Club
Posts: 785
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50a deck
60A grader blade
Circle of Safety: Y

Re: Carb rebuild today!

Postby clodhopper » Mon Dec 03, 2012 9:13 am

Hengy wrote:One note on the rubber inner tube washer... With the ethanol in today's gas, that rubber will wear out and fail if it get in contact with any gas. When we rebuilt Merlin's carb at the cubfest where I got him, we used a nitrile rubber o-ring in place of gasket on the carb. Worked great for about 3 years and then the rubber failed.

I know what you mean, but with a whole rear innertube to cut washers from, I doubt it will be much of a problem! :D

User avatar
bob in CT
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 5974
Joined: Thu Jun 07, 2007 9:34 am
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety: Y
Location: CT, Manchester

Re: Carb rebuild today!

Postby bob in CT » Thu Apr 18, 2013 5:27 am

Hengy wrote:One note on the rubber inner tube washer... With the ethanol in today's gas, that rubber will wear out and fail if it get in contact with any gas. When we rebuilt Merlin's carb at the cubfest where I got him, we used a nitrile rubber o-ring in place of gasket on the carb. Worked great for about 3 years and then the rubber failed.

According to an industry O-ring compatibility guide nitrile is compatible with both ethanol and gasoline.


Return to “Farmall Cub”

Who is online

Users browsing this forum: clintmo, les king, ParlowMillFarm and 2 guests