Fri Oct 05, 2012 12:47 pm
I put a new bearing on the shaft that the belt pulley rides on. When I went to put on the oil seal, I noticed that it was 2 1/16ths larger there abouts than the pto shaft.The seal # is cr11223. Its 1 and 2/16ths dia while the shaft is 15/16ths dia.
I got on YT and someone said that I needed a bushing to go somewhere, but couldnt/didnt tell me the part# or exactly, to me, where it went. Can ya help me out??
Fri Oct 05, 2012 1:26 pm
I thought what was said there was fairly clear. Here is a picture. You need reference number 45 and either the pulley or number 46 to hold it in place.
Fri Oct 05, 2012 7:05 pm
You might want to view this thread - Belt Pulley Gear Box Rebuild
BTW, g'day to you.
Fri Oct 05, 2012 7:20 pm
This might help also
You do not have the required permissions to view the files attached to this post.
Fri Oct 05, 2012 8:05 pm
I called the IH dealer for Okla, or at least the Eastern 1/2 of it. Said those bushings had been deleated from stock decades ago. Anybody know where to find them?
Fri Oct 05, 2012 10:01 pm
You may want to try a local trades supply shop - bring in the old bushing and the dimensions needed. They may be able to provide the bushing that you need.
Sat Oct 06, 2012 7:01 am
Newer version, Tim.
Sat Oct 06, 2012 7:52 am
Will have better info after I start to put it back together, but as Jim says that seal does run on the 'bushing' and the other bushing should be on the shaft with the bolt (and a thick 'washer' #48) on the end to keep it in place.
That bushing may be why my Mott mower gear box is leaking?? I will take that one apart after I finish mowing this weekend.
Sat Oct 06, 2012 8:28 pm
Buzzard Wing wrote:that seal does run on the 'bushing' and the other bushing should be on the shaft with the bolt (and a thick 'washer' #48) on the end to keep it in place.
Well I just figured out what that weird part was on Granny's Belt Pulley Gear Box.
Sat Oct 06, 2012 9:34 pm
I dont have EITHER collars/bushings. If I did I would have taken them if bad to a machine shop and had them made. IF I could get specs I should be able to do that anyway.
Sat Oct 06, 2012 9:43 pm
Ok. We should know what all the dimensions are for the bushing while we are at Cecil's. There are a couple of Belt Pulley rebuilds slated. Of course Larry is in the midst of one now as well.
Sun Oct 07, 2012 8:33 pm
Well, Thanks guys for the offers of help.
Mon Oct 08, 2012 8:21 am
Up to my eyeballs at the moment, but may try to have a fellow Cub owner teach me a trick about 'sizing' the mystery center bearing.
I haven't taken the Mott mower's right angle pulley off yet (just mowed the fort with it yesterday) but I am thinking that bushing may be why it leaks (and lets water in).
Pictures are still in the camera....
Mon Oct 08, 2012 8:30 am
Maybe this will help clear things up.viewtopic.php?f=142&t=47666
Mon Oct 08, 2012 12:48 pm
I had forgotten Bill had done that article. Will print it out I think and take it with us.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.