Help identify implement parts please

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Help identify implement parts please

Postby Jvanvuren » Sat Oct 06, 2012 10:47 pm

Hey all,

I'm on a shed-cleaning kick, and have accumulated the following parts over the years. I'm not really sure what some of it is, and figured if I posted a few pictures... 8)

I've done a bunch of looking at TM Tractor's site and have possibly identified a few things. Others are still a mystery. Ideally, I would like to know approximate values for these parts as well. Thanks in advance for any help you can provide!

Image
These parts came off the same tractor. From TM's site, they appear to be for use with a Cub 189 Two Way Moldboard Plow. What would they be called? Would the lever also work with a 193 plow? I've also got the double chain hook for the rear rockshaft.


Image
Top two - I have absolutely no idea
Third from top - fast hitch helper spring? Can this serve any purpose on a tractor without a fast hitch? That's how I obtained it.
Bottom two - Cub 22 mower stuff? The smaller one appears to be broken on the end, like it should have threads or a cotter pin hole.


Image
This stuff all came from the same tractor, and I believe it is all cultivator related. Any idea of what it may be worth?


Image
More cultivator parts... the spring-loaded ones have a left, right, and center. The other 3 appear to be all the same. I think they are for use with the following pic:


Image
This stuff and the picture of the actual cultivator "diggers" all came with the same tractor. Is this just a generic toolbar, or is it part of an actual Cub implement? I have a few of the clamps shown, some are for use with round-shank cultivators and some for flat-shank (two of each shown here).

I have a local guy looking to buy cultivator stuff and have absolutely no idea what to ask. I know the front setup is missing some parts, but he has expressed interest even though I made it clear I don't have a complete setup.

Again, thanks for any help you can provide. If more pictures would be helpful, just let me know what you'd like to see.

John
Jvanvuren
5+ Years
5+ Years
 
Posts: 47
Joined: Fri Aug 10, 2007 3:31 pm
Location: Colorado Springs
Zip Code: 80918
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby Rudi » Sat Oct 06, 2012 11:05 pm

John:

You may want to look at these manuals :

Cub-189 Moldboard Plow 11-30-50
Cub-252 Cultivator 1-15-48
Cub-22 Manual 2-5-52
Cub-144 Cultivator 11-30-50

Hope this helps.

Image to Farmallcub.com :big smile: Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to :arrow: the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.


Prices will be determined by how complete the implements are. You do have a Cub-189 parts there, and the Cub-252 Cultivator is quite distinctive. Looks like the stay rod for a Cub-22 Sickle Bar Mower. You can identify some of the tools in either the 252 or the Cub-144 Cultivator Manuals.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28467
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Help identify implement parts please

Postby RaymondDurban » Sun Oct 07, 2012 4:51 am

How about I stop by and have a look! :D
PM Sent
User avatar
RaymondDurban
Team Cub Mentor
Team Cub Mentor
 
Posts: 4261
Joined: Wed Dec 26, 2007 7:45 pm
Location: FL, Crestview
Zip Code: 32536
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby Jim Becker » Sun Oct 07, 2012 9:53 am

I think most of the parts have been correctly identified. My additional thoughts:

The top 2 parts in the second picture: I don't recognize them either. They may not be Cub parts, could be seed drive linkage for something.

Big piece in the last picture: rather than a Cub-252 as suggested, it looks to me like a modified Cub-3 Field Cultivator.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11920
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby EarlyCub49 » Sun Oct 07, 2012 11:31 am

PM Sent.

Bruce T.
EarlyCub49
501 Club
501 Club
 
Posts: 706
Joined: Wed Aug 18, 2010 3:21 pm
Location: PA, Coopersburg
Zip Code: 18036
Tractors Owned: Presently
1949 Cub
1953 Cub
Simplicity Regent 22/44H
'
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby John *.?-!.* cub owner » Sun Oct 07, 2012 11:34 am

The [parts Jim could not identify I have seen, but not sure where. I am thinking radiator shutter control, though of course they would not be from a cub
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19450
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: Help identify implement parts please

Postby Jim Becker » Sun Oct 07, 2012 11:41 am

John *.?-!.* cub owner wrote:The [parts Jim could not identify I have seen, but not sure where. I am thinking radiator shutter control, though of course they would not be from a cub

GOT IT. Speed control linkage from a power unit.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11920
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby Don McCombs » Sun Oct 07, 2012 3:13 pm

PM sent.
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10537
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby K.J. Rutledge » Sun Oct 07, 2012 8:59 pm

PM sent.
K.J. Rutledge
Cub Star
Cub Star
 
Posts: 64
Joined: Fri Jan 22, 2010 10:59 am
Location: MO, Mt. Vernon
Zip Code: 65712
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby RaymondDurban » Sun Oct 07, 2012 9:14 pm

After looking through the parts manuals, and looking this over in person, I don't know what it is!!
Image

Unless there was a major redesign of the 252 from what's in Rudi's manuals, especially where it connects to the UMF, it's not that.
The two pieces of angle were used to bolt to a floating drawbar and are homemade. By the design the connecting bars come that connect the tool bars, it's not a Cub-3 either, although the lifting chains and dual hooks are similar.
There is a few hints of dark blue paint, but no other identifiable markings.

I'm thinking it's something IH but non-Cub that was made to work for a former owner.
User avatar
RaymondDurban
Team Cub Mentor
Team Cub Mentor
 
Posts: 4261
Joined: Wed Dec 26, 2007 7:45 pm
Location: FL, Crestview
Zip Code: 32536
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby Jim Becker » Sun Oct 07, 2012 10:07 pm

RaymondDurban wrote:I'm thinking it's something IH but non-Cub that was made to work for a former owner.

I think you are right. The bars between the 2 tool bars are built very much like the the tool bar style rear section of the Cub-252. Most parts look like a very close match to parts of the front section of the A-437 cultivator for the Farmall A (but bottom side up).
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11920
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby Rudi » Sun Oct 07, 2012 10:30 pm

I think so too. Gord had a bunch of A cultivator stuff here for awhile. That frame is pretty reminiscent of that as well. Originally thought it might be the 252 ... but guess not. I definitely will defer to Jim and Raymond on this one.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28467
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Help identify implement parts please

Postby Jvanvuren » Mon Oct 08, 2012 1:49 am

Hey guys,

It's late here, but I wanted to post a quick note of appreciation for the information so far. I also want to thank Raymond for stopping by today and answering a lot of my questions.

John
Jvanvuren
5+ Years
5+ Years
 
Posts: 47
Joined: Fri Aug 10, 2007 3:31 pm
Location: Colorado Springs
Zip Code: 80918
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby danovercash » Mon Oct 08, 2012 12:06 pm

The round rod with the spring on it, is it a helper spring for fast hitch, or maybe part of a 54-A blade? All of it did not show up in picture.
"It is impossible for a man to learn what he thinks he already knows." -Epictetus

252646 & 221525. 195897 (Gone but not forgotten!)
http://groups.yahoo.com/group/dansfarmallcub/
danovercash
10+ Years
10+ Years
 
Posts: 2889
Joined: Mon Feb 17, 2003 8:48 pm
Location: NC, Kannapolis
Zip Code: 28081
Circle of Safety Award
Circle of Safety: Y

Re: Help identify implement parts please

Postby RaymondDurban » Mon Oct 08, 2012 12:31 pm

danovercash wrote:The round rod with the spring on it, is it a helper spring for fast hitch, or maybe part of a 54-A blade? All of it did not show up in picture.

It's a helper spring assembly. The bracket that runs between the fender and transmission is not there.
User avatar
RaymondDurban
Team Cub Mentor
Team Cub Mentor
 
Posts: 4261
Joined: Wed Dec 26, 2007 7:45 pm
Location: FL, Crestview
Zip Code: 32536
Circle of Safety Award
Circle of Safety: Y

Next

Return to Farmall Cub

Who is online

Users browsing this forum: Arthur Dent, baldwindiesel, DannyBuck, ericofmaine, Glen, havoc1482, Jim Becker, RaymondDurban, Scrivet, Trent M, tyecop15 and 11 guests