This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Sickle Mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 14
- Joined: Mon Oct 08, 2012 3:57 pm
- Zip Code: 39571
- Tractors Owned: John Deere 5420 cab air
1952 Farmall Cub - Location: Pass Christian, MS
Sickle Mower
I have a 1952 Cub and I recently bought a used sickle mower. When I pick up the end of the mower to put it in the full up position perpendicular to the ground, the blade goes down toward the ground. Is there something missing that should prevent it from doing that?
-
- Team Cub
- Posts: 17244
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Sickle Mower
Here is a recent thread that discussed that problem.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=72938
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=72938
-
- 10+ Years
- Posts: 14
- Joined: Mon Oct 08, 2012 3:57 pm
- Zip Code: 39571
- Tractors Owned: John Deere 5420 cab air
1952 Farmall Cub - Location: Pass Christian, MS
Re: Sickle Mower
Thanks Jim. I have the mower manual. In the additional threads, they mentioned the Winfield Ear. Is there a picture or drawing that clearly points out the Winfield Ear? Additionally, what is the width of the PTO belt? I am using a wide v belt but it keeps jumping off. I'm going to try a more narrow one tomorrow. Thanks again.
- Don McCombs
- Team Cub Mentor
- Posts: 17449
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Sickle Mower
The Cub-22 mower takes a B size belt.
-
- 10+ Years
- Posts: 4947
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Sickle Mower
If the belt keeps jumping off, you've got one of three issues:
1. Belt cords are broken. Replace belt.
2. Alignment is WAY off. It should be perfectly straight up and down.
3. Belt is way too loose. Tighten the belt.
1. Belt cords are broken. Replace belt.
2. Alignment is WAY off. It should be perfectly straight up and down.
3. Belt is way too loose. Tighten the belt.
-
- 10+ Years
- Posts: 14
- Joined: Mon Oct 08, 2012 3:57 pm
- Zip Code: 39571
- Tractors Owned: John Deere 5420 cab air
1952 Farmall Cub - Location: Pass Christian, MS
Re: Sickle Mower
Thanks Matt. The alignment is definitely off. The two pulleys are definitely not aligned straight up and down. The PTO pulley is exactly the width of the pulley forward of the mower pulley. Either the PTO pulley has to go rearward to align over the mower pulley or the mower pulley has to go forward to align over the PTO pulley. The big question is how is that done?
-
- Team Cub
- Posts: 17244
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Sickle Mower
I haven't any good pictures of the pegs. In the first image, illustrations 3 and 4 show one peg on the back side. In the second image, reference 11 is the part with the other peg, although it doesn't show in the illustration. When you have the cutter bar up, those pegs should run into each other to keep the knife up.
-
- Team Cub
- Posts: 17244
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Sickle Mower
pat.ladner wrote:Thanks Matt. The alignment is definitely off. The two pulleys are definitely not aligned straight up and down. The PTO pulley is exactly the width of the pulley forward of the mower pulley. Either the PTO pulley has to go rearward to align over the mower pulley or the mower pulley has to go forward to align over the PTO pulley. The big question is how is that done?
What do you have for a PTO pulley? The original has quite an offset.
-
- 10+ Years
- Posts: 14
- Joined: Mon Oct 08, 2012 3:57 pm
- Zip Code: 39571
- Tractors Owned: John Deere 5420 cab air
1952 Farmall Cub - Location: Pass Christian, MS
Re: Sickle Mower
Chuck, if I can figure out how to post a picture, I will take one tomorrow and post it. It has spines where you can move it in a out but it appears that it is out as far as it will go.
- tmays
- 10+ Years
- Posts: 3402
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Sickle Mower
It should have a hole for a carter key. Carter key also goes thru hole in pto shaft
Thomas
-
- 10+ Years
- Posts: 14
- Joined: Mon Oct 08, 2012 3:57 pm
- Zip Code: 39571
- Tractors Owned: John Deere 5420 cab air
1952 Farmall Cub - Location: Pass Christian, MS
Re: Sickle Mower
When the carter key is removed, can the PTO pulley be extended rearward to align directly over the mower pulley?
- tmays
- 10+ Years
- Posts: 3402
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Sickle Mower
If you have carter key installed and alignment is not correct, problem isn't with the pto pulley. If you have the right pulley. Maybe the flywheel shaft is shimmed too much?
Thomas
-
- 10+ Years
- Posts: 14
- Joined: Mon Oct 08, 2012 3:57 pm
- Zip Code: 39571
- Tractors Owned: John Deere 5420 cab air
1952 Farmall Cub - Location: Pass Christian, MS
Re: Sickle Mower
Where are the flywheel shims and will taking them out allow for the movement equal to the width of the mower pulley?
-
- Team Cub
- Posts: 17244
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Sickle Mower
If you have a full pulley width of misalignment, the small stack of shims isn't going to be enough to fix it. Take close look at the Cub-22 pictures on the TM Tractor Parts web site to see where you may be off kilter. Here are direct links to 2 pages. By the way, the shims are on the mower flywheel shaft at each end, between the mounting brackets and the pulley or flywheel.
http://www.tm-tractor.com/gim/cub22_001.htm
http://www.tm-tractor.com/gim/22com_001.htm
http://www.tm-tractor.com/gim/cub22_001.htm
http://www.tm-tractor.com/gim/22com_001.htm
-
- 10+ Years
- Posts: 14
- Joined: Mon Oct 08, 2012 3:57 pm
- Zip Code: 39571
- Tractors Owned: John Deere 5420 cab air
1952 Farmall Cub - Location: Pass Christian, MS
Re: Sickle Mower
Jim,
I sent you a PM.
I sent you a PM.
Who is online
Users browsing this forum: baldwindiesel and 4 guests