This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
magneto farmall cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 6
- Joined: Fri Oct 12, 2012 9:51 pm
- Zip Code: 59404
magneto farmall cub
Hey guys, does anyone know anything about magnetos? I have a farmall cub that is sparking on 2,3, and 4 but only part time on 1. Does that sound like the coil part of the mag or the whole mag. Does anyone know the best place to buy one..................John
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: magneto farmall cub
Are you sure the cap is good?
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 6
- Joined: Fri Oct 12, 2012 9:51 pm
- Zip Code: 59404
Re: magneto farmall cub
yes It is brand new
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: magneto farmall cub
Wires? Plug?
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 6
- Joined: Fri Oct 12, 2012 9:51 pm
- Zip Code: 59404
Re: magneto farmall cub
there not new but switched them around and 2,3,and 4 all spark and 1 sparks only occasionally.
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: magneto farmall cub
You have to remember the magneto produces the same consistent spark every time. Whether it is a good spark or a weak spark, the mag has no idea where that spark is going, that is left up to the distribution system.
The coil directs the voltage to the center tower of the distributor cap. The rotor then directs the voltage to the outlying distributor towers in time with the engine.
From there the plug wire delivers the voltage to the plug which is where the spark happens.
Since you report good spark at 3 of the 4 plugs, the cap is new, we know the mag is capable of producing enough juice for a good spark. The rotor is transferring the voltage 3 of 4 times, it is being distributed to 3 of the 4 plugs so by elimination, it can only be the high tension lead or the sparkplug itself.
Double check number one high tension lead and plug.
Normally a 4 cylinder cub will start and run on one dead hole. A running cub will develop a miss if it loses one cylinder and not stop running.
Since you changed the coil, I am thinking that was the original problem that caused the tractor to stop running. In the process of changing the coil it is possible the high tension lead was damaged, not intentionally but from age.
The coil directs the voltage to the center tower of the distributor cap. The rotor then directs the voltage to the outlying distributor towers in time with the engine.
From there the plug wire delivers the voltage to the plug which is where the spark happens.
Since you report good spark at 3 of the 4 plugs, the cap is new, we know the mag is capable of producing enough juice for a good spark. The rotor is transferring the voltage 3 of 4 times, it is being distributed to 3 of the 4 plugs so by elimination, it can only be the high tension lead or the sparkplug itself.
Double check number one high tension lead and plug.
Normally a 4 cylinder cub will start and run on one dead hole. A running cub will develop a miss if it loses one cylinder and not stop running.
Since you changed the coil, I am thinking that was the original problem that caused the tractor to stop running. In the process of changing the coil it is possible the high tension lead was damaged, not intentionally but from age.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: magneto farmall cub
I responded to your question after reading the other mag problem posted... Add the distributor cap to the suspect list which I believe Barnyard already mentioned.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
- Rick Spivey
- Cub Pro
- Posts: 2778
- Joined: Sun Jul 01, 2007 10:07 pm
- Zip Code: 29518
- Circle of Safety: Y
- Location: SC, Cades 29518
Re: magneto farmall cub
Make sure the high tension leads are actually snapping all the way down into the cap towers, and there is no corrosion on them. Your problem is somewhere between the cap and the plug, not in the coil.
Rick Spivey
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: magneto farmall cub
What is the history on this magneto?
Are the symptoms a new occurance or is this your first time using the magneto?
Are all spark plug wires solid (metal) core?
Remove the coil to distributor wire from the distributor - place end about 1/4" from engine block. Hand crank the engine watching the spark. This will seperate the spark distribution system from the spark generation system.
Are the symptoms a new occurance or is this your first time using the magneto?
Are all spark plug wires solid (metal) core?
Remove the coil to distributor wire from the distributor - place end about 1/4" from engine block. Hand crank the engine watching the spark. This will seperate the spark distribution system from the spark generation system.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: magneto farmall cub
Eugene wrote: This will seperate the spark distribution system from the spark generation system.
This is very, very sound advice. You have two completely separate systems contained in one unit, this applies to both magneto and electric sparked engines.
Trouble shoot each system separately. Make sure you have a good crisp arc from the mag or coil every time it snaps. If it does, then and only then move to the distribution system checking from the rotor forward to include the cap, wires and plugs.
Pulling components from both systems at the same time leads to increased confusion when the engine won't fire when your repair is complete.
I always try to impress upon people to never work on more than one component system at a time without first test firing to make sure what you did works. The distributor or mag often fool people into thinking it is one system.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
Who is online
Users browsing this forum: No registered users and 42 guests