Shift Lever Problem

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Shift Lever Problem

Postby thiggy » Tue Oct 16, 2012 2:50 pm

I removed my shift lever this AM to check if there was anything visible which was causing a clicking noise in first and reverse. I was checking to see if there was anything obvious such as a chipped tooth on a gear, but couldn't see anything which looked like it may be the cause of the noise. However, I did find a strange item. In the attached photo, note the small tab (about 1/2" X 1/16") which had broken off the underside of the lever quadrant. Fortunately, it had not fallen into the tranny, but had stuck to the edge of the shift lever mating surface. Can someone tell me what purpose this tab serves and is there any reason to be concerned about using the tractor without it, as long as the shift lever works properly? Thanks
Since retirement, the things I miss most are the holidays!
5+ Years
5+ Years
Posts: 456
Joined: Thu May 19, 2005 2:04 pm
Location: Birmingham Al/Bay Springs Ms.
Zip Code: 35216
Tractors Owned: 1947 Cub
1949 Cub
2011 JD X320
Circle of Safety Award
Circle of Safety: Y

Re: Shift Lever Problem

Postby Bob McCarty » Tue Oct 16, 2012 3:04 pm

I think it serves to align the slotted piece when it's inserted, and also indicates when it has been inserted far enough. Your shifter should be okay without it.

"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
Posts: 5692
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Return to Farmall Cub

Who is online

Users browsing this forum: cub 3, Jim Becker, Spuds Buddy and 6 guests