Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
9 posts • Page 1 of 1
I have been wanting to fab a set of forks for my loader, but wasn't finding any "cheap" forklift forks to start the project.
My brother was up a couple weeks ago and we were talking and he said "why do they have to be those type forks...they are so overbuilt for your purposes, why not just use something else".
So, we start wandering around the place and found some more steel pipe like I used for my boom pole,
IH 1000 Loader Boom Pole
and decided to give that a shot.
A couple hours later we had the rough idea together.
It lifts really well and is very convenient.
All my implements and 'stuff' will now be put on pallets and I can move it all around without always getting on and off the loader.
I painted them white for high visibility.
Really wish my brother lived closer...who knows what kinds of projects we would be making.
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
Nice job. It looks like a loader really comes in handy sometimes. Now if only Ray would get his done and on a tractor lol.
1956 Farmall Cub
1943 Farmall M
Cub Cadet 147
Cub Cadet 128-SOLD
1969 Bolens 850 "Special"
1968 Bolens 1050
Allis Chalmers 712S
Wheel Horse B 111
Wheel Horse Electro 12
National triplex reel mower
Dave, It looks even better now that its painted. Thanks again for the chestnuts.
"We don't need to think more,
we need to think differently."
Looks like it will be a handy addition, to the cub. Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
Chestnuts, chestnuts LOL
One Life , One Love , A Love Supreme
1955 michael e. pugh el
The only thing new is untold history, Harry Truman
That looks like a very useful project .. well thought out and well done
Them was your chestnuts?????
Hmmm, I sure liked them and so did Em! In fact she liked em so much that she smuggled a few back home
That steel water pipe welded into the fittings isn't the strongest thing in the world. It likes to split at the threads, even underneath a layer of weld.
As long as you don't try to lift a huge amount it should hold up okay, though.
Looks real nice Dave. I'm sure that will be very handy to have. Did you weld the pipe joints? (I'm sure you did.) What kind of weight will that handle? I like the pole boom too.
I got a cheap 3-point carry-all from Northern Tool and modified it to fit on the loader. I can't find the thing on Northern's web site, but it was similar to this one at Agri-Supply:
I needed to drill a few holes and make a couple small brackets. It is all bolted together so it can be converted back for 3-point with little effort. The one thing about it is that it is pretty flexible and can twist. You need to keep fairly even loads on both sides. If I want to lift something with a chain, I need to make a piece that will lay across both sides so the chain can hang from the center. I haven't used it much, but so far it seems to do all I expect of it.
9 posts • Page 1 of 1
Who is online
Users browsing this forum: Dale Finch and 6 guests