IH 1000 Loader Forks

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

IH 1000 Loader Forks

Postby Winfield Dave » Sat Oct 20, 2012 6:41 pm

I have been wanting to fab a set of forks for my loader, but wasn't finding any "cheap" forklift forks to start the project.
My brother was up a couple weeks ago and we were talking and he said "why do they have to be those type forks...they are so overbuilt for your purposes, why not just use something else".

So, we start wandering around the place and found some more steel pipe like I used for my boom pole,
IH 1000 Loader Boom Pole
and decided to give that a shot.
A couple hours later we had the rough idea together.

It lifts really well and is very convenient.
All my implements and 'stuff' will now be put on pallets and I can move it all around without always getting on and off the loader.
I painted them white for high visibility.

Really wish my brother lived closer...who knows what kinds of projects we would be making. :D

Fork 1.JPG

Fork 2.JPG

Fork 3.JPG

Fork 4.JPG
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
User avatar
Winfield Dave
501 Club
501 Club
 
Posts: 2636
Joined: Thu Apr 22, 2010 2:31 pm
Location: PA, Middleport (Schuylkill County)
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety Award
Circle of Safety: Y

Re: IH 1000 Loader Forks

Postby 56cub » Sat Oct 20, 2012 9:43 pm

Nice job. It looks like a loader really comes in handy sometimes. Now if only Ray would get his done and on a tractor lol.
1956 Farmall Cub
1943 Farmall M
Cub Cadet 147
Cub Cadet 128-SOLD
1969 Bolens 850 "Special"
1968 Bolens 1050
Allis Chalmers 712S
Wheel Horse B 111
Wheel Horse Electro 12
National triplex reel mower
User avatar
56cub
5+ Years
5+ Years
 
Posts: 744
Joined: Mon Dec 03, 2007 3:44 pm
Location: pa, mcdonald
Zip Code: 15057
Tractors Owned: 1956 farmall cub
Circle of Safety Award
Circle of Safety: Y

Re: IH 1000 Loader Forks

Postby Bob McCarty » Sat Oct 20, 2012 10:22 pm

Dave, It looks even better now that its painted. Thanks again for the chestnuts.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
 
Posts: 5630
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Re: IH 1000 Loader Forks

Postby ScottyD'sdad » Sun Oct 21, 2012 6:47 am

Looks like it will be a handy addition, to the cub. Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
ScottyD'sdad
Cub Pro
Cub Pro
 
Posts: 5082
Joined: Thu Aug 31, 2006 7:00 pm
Location: Ma. Rehoboth
Zip Code: 02769
Circle of Safety Award
Circle of Safety: Y

Re: IH 1000 Loader Forks

Postby daddydip » Tue Oct 23, 2012 7:51 pm

Bob McCarty wrote:Dave, It looks even better now that its painted. Thanks again for the chestnuts.

Bob

Chestnuts, chestnuts LOL
One Life , One Love , A Love Supreme

1955 michael e. pugh el

The only thing new is untold history, Harry Truman
User avatar
daddydip
5+ Years
5+ Years
 
Posts: 1802
Joined: Thu Sep 25, 2008 9:57 am
Location: Pa. southeast
Zip Code: 19320
eBay ID: 2001fltri
Tractors Owned: CC108

1948 farmall f cub
1955 farmall f cub
1955 international lo boy

1952 vai case

2005 236B Caterpillar

1999 TDI Jetta MK IV I like!
2008 H.D FLTRI

Re: IH 1000 Loader Forks

Postby Rudi » Tue Oct 23, 2012 9:35 pm

Dave:

That looks like a very useful project .. well thought out and well done :!:

Them was your chestnuts?????

Hmmm, I sure liked them and so did Em! In fact she liked em so much that she smuggled a few back home :lol:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28471
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: IH 1000 Loader Forks

Postby Matt Kirsch » Tue Oct 23, 2012 9:43 pm

That steel water pipe welded into the fittings isn't the strongest thing in the world. It likes to split at the threads, even underneath a layer of weld.

As long as you don't try to lift a huge amount it should hold up okay, though.
Matt Kirsch
10+ Years
10+ Years
 
Posts: 3347
Joined: Tue Jun 08, 2004 3:04 pm
Location: Rochester, NY
Zip Code: 14559
Circle of Safety Award
Circle of Safety: Y

Re: IH 1000 Loader Forks

Postby Smokeycub » Wed Oct 24, 2012 8:23 am

Looks real nice Dave. I'm sure that will be very handy to have. Did you weld the pipe joints? (I'm sure you did.) What kind of weight will that handle? I like the pole boom too.
Ray
Smokeycub
Attachments - 193 plow - 144 cultivator - 22 mower - 28A disc harrow - 54 leveling blade - Woods 59C2 - drag harrows - Mott D9 flail
Smokeycub
501 Club
501 Club
 
Posts: 610
Joined: Tue Apr 26, 2011 10:47 am
Location: Ravenna, Ohio
Zip Code: 44266
Tractors Owned: 48 F Cub #11676
65 Cub Cadet 104
70 450C JD
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C
Circle of Safety Award
Circle of Safety: Y

Re: IH 1000 Loader Forks

Postby Jim Becker » Wed Oct 24, 2012 9:38 am

I got a cheap 3-point carry-all from Northern Tool and modified it to fit on the loader. I can't find the thing on Northern's web site, but it was similar to this one at Agri-Supply:
http://www.agrisupply.com/Point-Carry-All-Fork-Attachment/p/65060/&sid=&eid=/
I needed to drill a few holes and make a couple small brackets. It is all bolted together so it can be converted back for 3-point with little effort. The one thing about it is that it is pretty flexible and can twist. You need to keep fairly even loads on both sides. If I want to lift something with a chain, I need to make a piece that will lay across both sides so the chain can hang from the center. I haven't used it much, but so far it seems to do all I expect of it.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11923
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y


Return to Farmall Cub

Who is online

Users browsing this forum: AL Farmall Boy, Arthur Luke, Smokeycub and 7 guests