This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Rebuild Kit For 76 Cub

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
pm_wells
Cub Star!!
Cub Star!!
Posts: 270
Joined: Sat Oct 02, 2021 12:04 pm
Zip Code: 28635

Rebuild Kit For 76 Cub

Postby pm_wells » Mon Oct 22, 2012 5:10 pm

I am wanting to order the T/C rebuild kit for a 1976 long stripe cub. The T/C unit doesn't have regular part and date casting numbers on the left like most. The only numbers on the left side are 12 75 stamped on the flat above where the lines attach. On the end behind the dash there is a number cast on what I was told is the head. Maybe someone that knows the late cubs can help me with the right rebuild kit. The serial number for this cub is 248854. Thanks for any help. Here are a few pic's
Image
Image
Image
Image
Image

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Boss Hog
Cub Pro
Cub Pro
Posts: 10290
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: Rebuild Kit For 76 Cub

Postby Boss Hog » Mon Oct 22, 2012 6:18 pm

IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

Jim Becker
Team Cub
Team Cub
Posts: 17241
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Rebuild Kit For 76 Cub

Postby Jim Becker » Mon Oct 22, 2012 6:26 pm

My '79 is about the same. It has a nearly legible mark that may be a date code. They may have put the part number some hard to find place, like inside. I think you can assume it is part 360719R1 until you run into some evidence otherwise.

User avatar
Boss Hog
Cub Pro
Cub Pro
Posts: 10290
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: Rebuild Kit For 76 Cub

Postby Boss Hog » Mon Oct 22, 2012 6:44 pm

like the link I posted
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

pm_wells
Cub Star!!
Cub Star!!
Posts: 270
Joined: Sat Oct 02, 2021 12:04 pm
Zip Code: 28635

Re: Rebuild Kit For 76 Cub

Postby pm_wells » Mon Oct 22, 2012 7:32 pm

I tried to reach someone at TMTractor parts with no success today. I am sure they know what rebuild kit I need for this unit even I don't have a parts number. I did talk to someone at De farmall cubs and was told that I must be over looking the number and the number on the end was the head number. So the number 360719R1 should be the right number and may be on the inside. I just didn't want to get the wrong kit and take the unit apart only to find the kit was not the right one.

Jim Becker
Team Cub
Team Cub
Posts: 17241
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Rebuild Kit For 76 Cub

Postby Jim Becker » Mon Oct 22, 2012 7:44 pm

At this point, you have 2 choices. Start tearing it apart and order the kit after you find proof of the block number. Or order the kit for 360719R1 hoping it is correct and tear into it after you have the kit. I would be very surprised if it isn't the right kit. Boss Hog gave you the pointer to the right kit for that block.

pm_wells
Cub Star!!
Cub Star!!
Posts: 270
Joined: Sat Oct 02, 2021 12:04 pm
Zip Code: 28635

Re: Rebuild Kit For 76 Cub

Postby pm_wells » Mon Oct 22, 2012 7:53 pm

I have to say I trust Boss Hogs judgement on this, and will order the kit he referred me to.
Thanks
Paul

User avatar
Arthur Luke
Cub Pro
Cub Pro
Posts: 852
Joined: Fri May 09, 2008 2:47 pm
Zip Code: 74022
Tractors Owned: 8 F Cubs, 7 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
Circle of Safety: Y
Location: OK, Copan

Re: Rebuild Kit For 76 Cub

Postby Arthur Luke » Mon Oct 22, 2012 8:52 pm

Did you look under here?
Image
Have a good day, Art Image
Circle of Safety

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Rebuild Kit For 76 Cub

Postby John *.?-!.* cub owner » Mon Oct 22, 2012 8:59 pm

Glad you posed that Arthur, I was going to try describing where that was located, but a picture is better

Another way to tell is to look straight in from the rear where pistons enter). I know, I am backwards. If there are 2 fairly large plugs screwed in, you have an early one which would be block number 351981R1 or 354383R1 through 354383R4.

If no hex plugs screwed in the back you have TC block 360719R1
If you are not part of the solution,
you are part of the problem!!!

pm_wells
Cub Star!!
Cub Star!!
Posts: 270
Joined: Sat Oct 02, 2021 12:04 pm
Zip Code: 28635

Re: Rebuild Kit For 76 Cub

Postby pm_wells » Mon Oct 22, 2012 9:29 pm

Well what do you know, I went out to the shop and there it was under a layer of dust and dirt just as Art's picture shows just inside top left 360719-R1. I know I would have seen it at some point. After being advised to make sure I had the right number and not seeing it right away I thought I had better ask someone who would know. Thanks Art, John, Jim, Boss, and all.
Paul


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 26 guests