Wazzits in the blacksmith shop.

Anything that might not belong on the other message boards!

Moderator: Team Cub

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 22626
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Wazzits in the blacksmith shop.

Postby John *.?-!.* cub owner » Mon Oct 22, 2012 8:12 pm

I have been helping Scrivet clean out stuff he bought at the estate auction of an Uncle of his. One of the things he bought was the contents of an old long abandoned blacksmith shop in which we are finding all kinds of things. Ground hogs have been in there so long that the dirt is piled up 2 to 2 1/2 feet deep, burying the lower shelf on the work bench, as well as everything else that had been piled in it for years.

Here is one of the things we found that we could not identify for sure. It appears to be a chopper/grinder for some type of dry material. The processed material comes out the hole in the second picture,, and the knives on the sides in the 3rd picture appear to be removable to sharpen or replace. My thoughts were that it might be for cutting up dried tobacco leaves for use in pipes and cigarettes. Does anyone know for sure what it is?
If you are not part of the solution,
you are part of the problem!!!

User avatar
Mr Ziffel
5+ Years
5+ Years
Posts: 163
Joined: Thu Jan 06, 2011 10:56 am
Zip Code: 20106
Tractors Owned: 1950 Cub with 193 plow, snow plow. Woods 59 mower. unknown disk, John Deere spring-tooth harrow, 2009 New Holland T1510, Massey Ferguson Mod 25 Disc (I think)
Circle of Safety: Y
Location: Virginia

Re: Wazzits in the blacksmith shop.

Postby Mr Ziffel » Tue Oct 23, 2012 9:56 pm

Yes, you are right. It is a Tobacco grinder. http://www.etsy.com/listing/98013567/18 ... -cast-iron

  • Similar Topics
    Last post

Return to “Off Topic”

Who is online

Users browsing this forum: No registered users and 1 guest