Farmall 100, 1954 - 1973
Moderator: Team Cub
by icebeer2875 » Tue Oct 23, 2012 1:50 pm
We have a Farmall 100.
I'm looking for a service manual or at the vary least a diagram showing how everything in the steering box goes back together.
Can anyone help?
I have a feeling what I am looking for is at this site, I'm just not looking in the right place.
-
icebeer2875
-
- Posts: 3
- Joined: Tue Oct 23, 2012 1:44 pm
- Zip Code: 14086
by EZ » Wed Oct 24, 2012 5:37 pm
icebeer, Did. you recently take one apart?
I just did my 130, should be much the same. I can tell you some things about it. I had to swap out a broken woodruff key. Also replaced the bearings and seals and gasket.
Just Do It !
-

EZ
- 501 Club

-
- Posts: 935
- Joined: Tue Feb 11, 2003 6:33 pm
- Location: Northern Ontario
by icebeer2875 » Thu Oct 25, 2012 11:47 am
We have one at work that has not had any attention paid to it in a long time. It has been decided that it will be made pretty again. The steering box was connected to the plow, just wanted to make sure we weren't going to cause it to start leaking by pulling the plow bolt out of there. The plow will not be going back on  Thanks for your help guys.
-
icebeer2875
-
- Posts: 3
- Joined: Tue Oct 23, 2012 1:44 pm
- Zip Code: 14086
by EZ » Sat Oct 27, 2012 9:43 am
ice, Do you have any pictures to share?
Just Do It !
-

EZ
- 501 Club

-
- Posts: 935
- Joined: Tue Feb 11, 2003 6:33 pm
- Location: Northern Ontario
Return to Farmall 100 Series, 100, 130, 140
Who is online
Users browsing this forum: No registered users and 1 guest
|
|