steering box seals

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

steering box seals

Postby dcpky » Fri Oct 26, 2012 6:47 pm

hey guys i have a 1951 Farmall Cub today i took apart steering box going to replace steering shaft seal as well as the seal in houseing along with new gaskets My ? is do i have to put 90 wt oil back in or while i have worm gear and sreering gear clean and pack with clean grease in stead of useing 90 wt oil Also i live in ky is there some place that one can take and have brakes relined TM tractor parts is about 80.00 a piece Thanks for any help great site for information
dcpky
 
Posts: 14
Joined: Sat Oct 13, 2012 6:12 am
Zip Code: 42368

Re: steering box seals

Postby Boss Hog » Fri Oct 26, 2012 7:53 pm

I wo0uld use gear oil the seals can be bought at NAPA, you could make the gasket, Dale Shaw is down near you he may have some used brake linings, If not I may have them
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: steering box seals

Postby Boss Hog » Fri Oct 26, 2012 7:55 pm

CR 11066 would be the # to ask fore on the seal for the worm shaft, any parts store should be able to cross the # for you
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: steering box seals

Postby Former Member » Fri Oct 26, 2012 9:58 pm

Boss Hog wrote:Dale Shaw is down near you he may have some used brake linings, If not I may have them


Well Boss, he is 220 miles north, but he is just a stones throw from Cub Brian.
Former Member
5+ Years
5+ Years
 
Posts: 6416
Joined: Tue Jan 29, 2008 10:56 pm
Zip Code: 00000
Circle of Safety Award
Circle of Safety: Y

Re: steering box seals

Postby Mike in Louisiana » Sat Oct 27, 2012 8:51 am

Check the how to section for brake lining. Or you might pm Bob McCarty he has been relining brakes.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
User avatar
Mike in Louisiana
5+ Years
5+ Years
 
Posts: 4203
Joined: Tue Feb 15, 2005 10:10 am
Location: LA, Doyline
Zip Code: 71023
Circle of Safety Award
Circle of Safety: Y

Re: steering box seals

Postby skylor60 » Wed Oct 31, 2012 6:40 am

Yes seen Bob do a set at Cecils cubfest he does very nice work
skylor60
10+ Years
10+ Years
 
Posts: 22
Joined: Mon Mar 22, 2004 7:33 pm
Location: South central Pa.
Zip Code: 17370
Circle of Safety Award
Circle of Safety: Y

Re: steering box seals

Postby ricky racer » Wed Oct 31, 2012 2:30 pm

Be sure to clean out the vent in the filler plug so it doesn't leak again after you replace the seal.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
User avatar
ricky racer
5+ Years
5+ Years
 
Posts: 2795
Joined: Wed Sep 12, 2007 8:40 pm
Location: Niles / Buchanan, Michigan
Zip Code: 49120
Circle of Safety Award
Circle of Safety: Y


Return to Farmall Cub

Who is online

Users browsing this forum: Arthur Dent, Radec Aksarben, Trent M and 11 guests