This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cooling, Pressure, and Caps
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Cooling, Pressure, and Caps
All of my long stripe cubs have pressure caps on them , no problems with them what so ever,more hp may have needed a little more cooling , however I would not use one on a early model cub
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: Cooling, Pressure, and Caps
challenger wrote:The discussion on pressurized cooling systems is all valid and interesting, but I still wonder how many work situations today's Cubs are subjected to that necessitates gaining a few more degrees of cooling capacity beyond that provided by the unpressurized system. The most important items are making sure your radiator and internal engine water jacket are clean, using a good rust inhibitor anti-freeze, and maintaining the proper coolant level in the radiator. Considering the age of the Cub, including the radiator and gaskets, it is my opinion that most owners will experience less trouble overall if they stay away from pressurizing their system.
Can't agree with you more, the reason both my old cubs have had their 7 pound pressure caps that were installed by the previous owners modified.
With the ratio of cooling capacity (onboard coolant reserve, core size, and air flow) to cubic inches of displacement, one would think the engineers had a good grip on the maximum amount of heat that could be produced under full load on a hot day but as previously brought to light, horsepower hungry attachments not originally available and thin air in the mountainous regions caused the engineers to rethink the possibility of the points between hot and boiling had become too close, making the change to the pressurized cooling system.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
-
- 10+ Years
- Posts: 228
- Joined: Sat May 03, 2008 3:26 pm
Re: Cooling, Pressure, and Caps
WITH HARD WORK-----THIS IS WHEN I RUN A 16 # CAP ON MY CUB -------THEMO-NUTHING STARTS TO WORK JUST
AS THE LIQUID GETS CLOSE TO BOILING POINT-----THIS IS WHEN THE LIQUID STARTS TO MOVE THROUGH THE
SYSTEM--------THIS NEW GAS WORKS BEST WITH A HIGH TEMPRATURE ENG.------WITH LIQUID UNDER PRESSURE IT
WILL GIVE UP THE HEAT QUICKER-----THUS SMALLER RADIATORS FOR MFG..----MY $0.08
GOOD LUCK
LOMBARD----SC----
AS THE LIQUID GETS CLOSE TO BOILING POINT-----THIS IS WHEN THE LIQUID STARTS TO MOVE THROUGH THE
SYSTEM--------THIS NEW GAS WORKS BEST WITH A HIGH TEMPRATURE ENG.------WITH LIQUID UNDER PRESSURE IT
WILL GIVE UP THE HEAT QUICKER-----THUS SMALLER RADIATORS FOR MFG..----MY $0.08
GOOD LUCK
LOMBARD----SC----
Who is online
Users browsing this forum: jobbyjim and 46 guests