This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Sidedresser hopper ??
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 15
- Joined: Tue May 15, 2012 6:46 pm
- Zip Code: 75948
Sidedresser hopper ??
I wanted to see if somebody could help me with a question,, on EBay there is a new plastic hopper that specifies Cub, Super A, 140,100,200,230 it is $320.00,,, there is another one from a different company that looks identical but does not specifically state for a cub , BUT list all the other tractor such as super A , 100, 200, 230 ect...for only $160.00 ,, my question is there a difference in these hopper ? If one will fit all the same tractor and a cub , shouldn't the other that fits all those same tractor shouldn't it also fit the cub ?? Any input would be greatly appreciated ,,
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Sidedresser hopper ??
Neither will work on a cub, The adjustment gate will hit the chain and or sprocket on a cub, unless you run it wide open and that would put down way too much fertilizer
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- clodhopper
- 10+ Years
- Posts: 807
- Joined: Sat May 07, 2011 8:20 pm
- Zip Code: 27526
- Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50C deck - Circle of Safety: Y
Re: Sidedresser hopper ??
Boss Hog wrote:Neither will work on a cub, The adjustment gate will hit the chain and or sprocket on a cub, unless you run it wide open and that would put down way too much fertilizer
While it is tight, mine works ok (agri supply chinese knockoff) There is enough room to close it just below halfway, but you cant close it off. Also, you can take the sidedresser assembly off, remove the shaft and gears, turn everything around and put it back together so that the drop spout is toward the front. That way, the feed gate adjustment is toward the tractor instead of the chain sprocket.
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Sidedresser hopper ??
you can make anything fit anything as to working as it should is another matter
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 15
- Joined: Tue May 15, 2012 6:46 pm
- Zip Code: 75948
Re: Sidedresser hopper ??
I really appreciate the info , and saving me the unnessacary aggravation and money !! Is there a particular replacement hopper that y'all recommend ?? Are the stainless hoppers I've seen advertised up to par ? Do they come complete ? I will need everything between the hopper base and the injector ,, thanks for any info u can give ( or advise ) ! ,,
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Sidedresser hopper ??
the stainless hoppers are great , but you only get the hopper
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 15
- Joined: Tue May 15, 2012 6:46 pm
- Zip Code: 75948
Re: Sidedresser hopper ??
Yea just realized that looking at them on Wengers site ,, is there anybody that makes the complete hopper with the bottom ( a complete hopper ready to mount) ? That is correct and works right ? I have found several on the Internet but they All look the same , like they come from one Place in China , is there one made in the U.S. by anybody ? I guess (if they are still available ) one from Case IH would require a second mortgage !?
-
- 10+ Years
- Posts: 527
- Joined: Sat Jul 17, 2010 10:41 am
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
- Location: New Castle, IN
Re: Sidedresser hopper ??
If you buy the hopper, you should be able to find the cast base without too much trouble. I got a complete base for $20 (minus the star wheel)
- AL Farmall Boy
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Sidedresser hopper ??
I recently called a local Case/IH dealer (the only 2 in the state actually) and Talledega International told me they are NLA, peroid. Aliceville Tractor told me they are NLA complete and the last time he sold a complete one (3 years ago), they (dealership parts dept) ordered all of the parts (which are still available), and put it together in the shop and sold it to the customer. This was, of course, at the cost of each part; which he stated to me was over $700.00.....I forgot the exact amount. Both dealerships actually had limited knowledge on the parts/products too.....from the way it sounded on the phone.
No comment.
I've got (3) NOS ones (two of which have the later model "CASE/IH" decal) that aren't going ANYWHERE!!
No comment.
I've got (3) NOS ones (two of which have the later model "CASE/IH" decal) that aren't going ANYWHERE!!
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Sidedresser hopper ??
how about some pics of them please
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Sidedresser hopper ??
I guess you are talking about the fiberglass hoppers not the gal. ones so no pics needed if they are the fiberglass ones
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- Super A
- 10+ Years
- Posts: 5232
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Sidedresser hopper ??
AL Farmall Boy wrote: the last time he sold a complete one (3 years ago), they (dealership parts dept) ordered all of the parts (which are still available), and put it together in the shop and sold it to the customer. This was, of course, at the cost of each part; which he stated to me was over $700.00
That sounds right. A local dealer who is in our IH club said basically the same thing a few years ago. I think it was around $600 for one assembled from parts back then!
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
- clodhopper
- 10+ Years
- Posts: 807
- Joined: Sat May 07, 2011 8:20 pm
- Zip Code: 27526
- Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50C deck - Circle of Safety: Y
Re: Sidedresser hopper ??
Super A wrote:AL Farmall Boy wrote: the last time he sold a complete one (3 years ago), they (dealership parts dept) ordered all of the parts (which are still available), and put it together in the shop and sold it to the customer. This was, of course, at the cost of each part; which he stated to me was over $700.00
That sounds right. A local dealer who is in our IH club said basically the same thing a few years ago. I think it was around $600 for one assembled from parts back then!
Al
I will take my 200 dollar setup that works fine, and put the other 4-500 in my pocket
Who is online
Users browsing this forum: tucker86 and 53 guests