This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
100 Fast Hitch Blade
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
100 Fast Hitch Blade
I brought this home this evening. Looks like it has been repainted before. It needs a new cutting edge but otherwise very nice.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
- jlmason81
- 10+ Years
- Posts: 132
- Joined: Thu Nov 18, 2010 8:43 pm
- Zip Code: 75126
- eBay ID: jlmason81
- Location: Forney, Texas
Re: 100 Fast Hitch Blade
Super A,
Nice find! You will love your new blade. Can you take out your pin and post a picture of it. I am trying to decide if it was a roll pin or a solid pin that went through the larger pin. #6 in the parts catalog. See my pics. Thanks for the help.
Jeff
Nice find! You will love your new blade. Can you take out your pin and post a picture of it. I am trying to decide if it was a roll pin or a solid pin that went through the larger pin. #6 in the parts catalog. See my pics. Thanks for the help.
Jeff
- Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: 100 Fast Hitch Blade
Jeff, I just went and looked, mine looks like a solid pin. I figured the big pin would be froze solid but when I pressed the release it fell right out!
Can you tell me what the part number for the cutting edge is? I think someone just used a piece of 1/8" thick piece of strap steel for mine. If you don't mind, could you take me a few pictures of it?
Thanks,
Al
Can you tell me what the part number for the cutting edge is? I think someone just used a piece of 1/8" thick piece of strap steel for mine. If you don't mind, could you take me a few pictures of it?
Thanks,
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
- jlmason81
- 10+ Years
- Posts: 132
- Joined: Thu Nov 18, 2010 8:43 pm
- Zip Code: 75126
- eBay ID: jlmason81
- Location: Forney, Texas
Re: 100 Fast Hitch Blade
There is a previous post somewhere on the forum where Peter made one from cold rolled steel. I am sure someone can attach the post. I have to make one too as mine is worn out. Thank you for the info. My pin looks original but the cross piece as you can tell has had it. I have it replaced with a 3/8" roll pin for now until i can make a copy.
- jlmason81
- 10+ Years
- Posts: 132
- Joined: Thu Nov 18, 2010 8:43 pm
- Zip Code: 75126
- eBay ID: jlmason81
- Location: Forney, Texas
Re: 100 Fast Hitch Blade
Super A,
Here are the pictures I saved so that I can make mine.
Jeff
Here are the pictures I saved so that I can make mine.
Jeff
- Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: 100 Fast Hitch Blade
Thanks, Jeff. How thick is the steel you used?
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- 10+ Years
- Posts: 251
- Joined: Thu Mar 16, 2006 6:27 pm
- Zip Code: 01516
- Location: Douglas, Mass
Re: 100 Fast Hitch Blade
nice find, they are hard to come by.
-
- Team Cub
- Posts: 11859
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: 100 Fast Hitch Blade
Peter's dimensions are for a 54" blade. The fast hitch blade is 60".
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: 100 Fast Hitch Blade
Peter did have some made up for the 100.... I have one on mine.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
- Brendan In NC
- 10+ Years
- Posts: 440
- Joined: Fri Jul 29, 2011 6:54 pm
- Zip Code: 27858
- Tractors Owned: 1964 Farmall Cub Red Square Nose # 223883 one of 2300 built before they switch to Yellow and White.
1964 Farmall 140 #27512
Just a Clean Strong run of the mill Farmall 140 with very little Wear.
Also have a bit of equipment
Woods C-42 Belly mower, 1963 IH McCormick #215 Plow, IH #144 Cultivators, IH Side Dresser (in need of some work non working at the moment) - Location: Greenville N.C
- Contact:
Re: 100 Fast Hitch Blade
Nice!! Find Al Would like one for my 140 one day im gonna get over there while your gone and load up Cant wait to see all shined up behind the Super A..
Tractors are like watermelons..Eat the red and throw away the green!!
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
- Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: 100 Fast Hitch Blade
Brendan In NC wrote:Nice!! Find Al Would like one for my 140 one day im gonna get over there while your gone and load up Cant wait to see all shined up behind the Super A..
You were nappin.....it was on eastern NC Craigslist. Same man that sold me my plow. I gotta stay off Craigslist! (He specialized in 140's.)
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
- Peter Person
- Cub Pro
- Posts: 4559
- Joined: Fri Nov 18, 2005 4:27 pm
- Zip Code: 06076
- Circle of Safety: Y
- Location: CT, Stafford Springs
Re: 100 Fast Hitch Blade
I used the info on TM Tractor's website in their brochure section to make the cutting edges a few years ago.
http://www.tm-tractor.com/gbrochures/100blade.htm
60" long x 2 1/2" tall x 3/16" thick however I had them made to 3" as I recall. I'll see if I can dig up the sketch. The photo shown in the post above is of the cutting edge for the IH100 Blade however as Bob stated the sketch is for the 54A cutting edge.
Peter
http://www.tm-tractor.com/gbrochures/100blade.htm
60" long x 2 1/2" tall x 3/16" thick however I had them made to 3" as I recall. I'll see if I can dig up the sketch. The photo shown in the post above is of the cutting edge for the IH100 Blade however as Bob stated the sketch is for the 54A cutting edge.
Peter
1957 Farmall Cub "Emory", Fast-Hitch, L-F194 Plow & Colter, L-38 Disc Harrow, Cub-54A Blade, Cub-22 Sickle Bar Mower, IH 100 Blade
- Brendan In NC
- 10+ Years
- Posts: 440
- Joined: Fri Jul 29, 2011 6:54 pm
- Zip Code: 27858
- Tractors Owned: 1964 Farmall Cub Red Square Nose # 223883 one of 2300 built before they switch to Yellow and White.
1964 Farmall 140 #27512
Just a Clean Strong run of the mill Farmall 140 with very little Wear.
Also have a bit of equipment
Woods C-42 Belly mower, 1963 IH McCormick #215 Plow, IH #144 Cultivators, IH Side Dresser (in need of some work non working at the moment) - Location: Greenville N.C
- Contact:
Re: 100 Fast Hitch Blade
Super A wrote:Brendan In NC wrote:Nice!! Find Al Would like one for my 140 one day im gonna get over there while your gone and load up Cant wait to see all shined up behind the Super A..
You were nappin.....it was on eastern NC Craigslist. Same man that sold me my plow. I gotta stay off Craigslist! (He specialized in 140's.)
Tim Fail Farmall140.com?? my best 140 buddy Al HaHa
Tractors are like watermelons..Eat the red and throw away the green!!
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Tractorguy140, YouTube
- Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: 100 Fast Hitch Blade
Brendan In NC wrote:Super A wrote:Brendan In NC wrote:Nice!! Find Al Would like one for my 140 one day im gonna get over there while your gone and load up Cant wait to see all shined up behind the Super A..
You were nappin.....it was on eastern NC Craigslist. Same man that sold me my plow. I gotta stay off Craigslist! (He specialized in 140's.)
Tim Fail Farmall140.com?? my best 140 buddy Al HaHa
Yep, that's him. Nice guy.
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Who is online
Users browsing this forum: Bill Hudson, Cub driver, tst and 43 guests