Rear end swap

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Posts: 21
Joined: Sun Oct 07, 2012 5:28 pm
Zip Code: 16115

Rear end swap

Postby Chevyguy » Sat Nov 03, 2012 6:48 pm

Anybody out there know if a 3 speed tranny and rear axle from a narrow frame Cub Cadet will fit a wide frame model - without any modifications?

Jack fowler
10+ Years
10+ Years
Posts: 905
Joined: Sat Feb 15, 2003 7:20 am
Zip Code: 00000

Re: Rear end swap

Postby Jack fowler » Sun Nov 04, 2012 5:57 am

This is what I found. I hope it helps.
I’m really good at doing nothing…With that said…I’m really, really good at doing nothing

User avatar
10+ Years
10+ Years
Posts: 2504
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: Rear end swap

Postby gitractorman » Sun Nov 04, 2012 6:52 am

The differential housing swap out, no problem. You'll need your axle tubes from the wide frame, to bolt onto the narrow frame differential. The only limiting factor is the internal or external brakes. Most of the wide frame CC tractors had external brakes (calipers and disks out on the axle tubes). Some of the narrow frame tractors had internal brakes, so this would not work in a wide frame tractor (well, not easily).
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller

Posts: 21
Joined: Sun Oct 07, 2012 5:28 pm
Zip Code: 16115

Re: Rear end swap

Postby Chevyguy » Sun Nov 04, 2012 9:21 am

Thanks for the feedback.

10+ Years
10+ Years
Posts: 248
Joined: Wed Sep 29, 2004 5:20 pm

Re: Rear end swap

Postby Merk » Sun Nov 04, 2012 12:36 pm

I have an 86 (wide frame Cub Cadet that has a comeplete rear end out of a 72 Cub Cadet. The only thing I had to change was the gear shifter. If your wide frame Cub Cadet is a manual trans Cub Cadet it should be easy to do change. I went frome disc brakes to an internal brake set up. The rod that goes between the brake lever and clutch/brake pedal arm may be a different length to the one in your wide frame Cub Cadet. I used the one that came the 72 rear end.

  • Similar Topics
    Last post

Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 2 guests