Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
12 posts • Page 1 of 1
hi, i have had this problem for a long time now, when i go to shift, the gears will grind, i have adjusted the clutch pedal a few times, and that didnt do anything, i have found that if i push the clutch in and push the shifter downwards, there is a very soft grinding, and it will soon stop, and then i can typically shift with out it grinding, i belive it is the throw out bearing, does anyone have a simple fix for this? or is splitting the tractor and replaceing the throw out bearing the best solution? my problem is my Cub is what i move snow with for a lot of people, and with me i know replacing the throw out bearing wont be a few day project, thanks
I'd suggest that you first remove the hand hole cover (if it's there) and look inside with a flashlight. If the graphite is chipped or worn down close to the metal carrier, it will need to be replaced. Otherwise, you may just need to adjust the clutch fingers. That can be done without splitting if you are patient enough to do it.
"We don't need to think more,
we need to think differently."
Click on the link above to go to the how to adjust clutch fingers. It is a task but can be done. You can make a tool to get in there and check the adjustment.
Guiena, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub.
Here is a how-to by Jeff Silvey that should be of some help to you:
Also note that there were two styles of clutches offered by IH---a Rockford (designated by a "J" stamped into your serial number plate) or an Auburn.
The serial number only tells you what was there originally. Could have been changed since it left IH's hands if someone has ever done a clutch job in the last 62 years.
Very true, I have not come across one yet that has been swapped out. I believe one of the two styles was more "heavy duty", but I do not recall whether it was the Rockford or Auburn that was advertised as such.
My 1957 Cub has a 'J' suffix but when we split it at Cecil's last month we discovered an Auburn clutch. Problem is you can't adjust the clutch fingers easily through the access hole on an Auburn clutch.
Replaced it with a Rockford clutch, and while the hood was off replaced the leaking rear main seal.
12 posts • Page 1 of 1
Who is online
Users browsing this forum: SCcub38 and 5 guests