Hello
I have a cub Cadet model 2185 with a pto problem, the original one rear bearing went out at about 400 hours and was so tight that I damaged it when removing it, I bought a new one (250+) and not even 2 hours run time the new ones bearings were shot even the one in the belt pulley, what can you do wrong installing this that would cause this problem??
Thanks...Gary L.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
2185 pto problem
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 19
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 17252
- Tractors Owned: 1949 Farmall Cub
- Location: South Central Pa
2185 pto problem
Gary L.
- Bermuda Ken
- 10+ Years
- Posts: 682
- Joined: Fri Feb 07, 2003 8:43 am
- Zip Code: 53536
- Tractors Owned: Tractors owned past/present:
Farmall.....F-1206, F-806 sn#501.
Cub Cadet...Original(s), 122, Spirit of 76, 1200, 1250, 1450, 782, 782 Diesel (2), 984, 982, CADET 000 LT Prototype. - Circle of Safety: Y
- Location: Wisconsin.......The Badger State
- Contact:
You may have done nothing wrong at all. Presuming that the unit went on fine, the bearings should not have failed that fast. If you had to use the retaining bolt to "crank it on", you broke it. CC should warrranty this unit for you if you did not force it on. Contact the dealer you bought it at for more details.
A key to long electric PTO clutch life is to engage/disengage the PTO at low engine speed!!!!
A key to long electric PTO clutch life is to engage/disengage the PTO at low engine speed!!!!
Cub Cadets....Engineered for people who know better!
-
- 10+ Years
- Posts: 19
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 17252
- Tractors Owned: 1949 Farmall Cub
- Location: South Central Pa
Thanks Ken
I discovered that I left out a 1/4" spacer and think that was probably the problem, do you have a manual showing exactly where it goes, there was 2 different clutches used and mine is bowl shaped at the base, the other has a triangle mtg base..I'd like to have the p/n for the triangle one and maybe find a used one..thanks Gary
I discovered that I left out a 1/4" spacer and think that was probably the problem, do you have a manual showing exactly where it goes, there was 2 different clutches used and mine is bowl shaped at the base, the other has a triangle mtg base..I'd like to have the p/n for the triangle one and maybe find a used one..thanks Gary
Gary L.
- Bermuda Ken
- 10+ Years
- Posts: 682
- Joined: Fri Feb 07, 2003 8:43 am
- Zip Code: 53536
- Tractors Owned: Tractors owned past/present:
Farmall.....F-1206, F-806 sn#501.
Cub Cadet...Original(s), 122, Spirit of 76, 1200, 1250, 1450, 782, 782 Diesel (2), 984, 982, CADET 000 LT Prototype. - Circle of Safety: Y
- Location: Wisconsin.......The Badger State
- Contact:
Who is online
Users browsing this forum: No registered users and 6 guests