This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
farmall cub feaver in Maine
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
farmall cub feaver in Maine
I was up in Maine the last week droping off my finished super C and came across a 48 cub with a trip bucket loader. I beleive it is a henderson. It has a pump that has its own resivoir on it, and it runs off the pto. maybe not the best idea when clutch is disengaged no pto. any way I could not find any info on the pump. Has any one seen this set up before? Funny I had cub feaver, but I didnt feel sick!
Pete from Virginia Beach
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
- 64/67lo-boy
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: farmall cub feaver in Maine
Yup, sure looks like a Henderson.
Pics courtesy of TM Tractor
The Henderson normally does not have a PTO pump as it connects to the Cub Touch Control. I imagine that a PO made the modification to the PTO pump. The Henderson does come with an auxillary reservoir though. Nice looking loader and Cub
Pics courtesy of TM Tractor
The Henderson normally does not have a PTO pump as it connects to the Cub Touch Control. I imagine that a PO made the modification to the PTO pump. The Henderson does come with an auxillary reservoir though. Nice looking loader and Cub
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 167
- Joined: Sun Nov 25, 2012 12:03 pm
- Zip Code: 16345
Re: farmall cub feaver in Maine
i recognize that pump , looks just like the jeep plow pump that was on my 1963 cj-5 plow jeep when i was a kid. i think it even said jeep or willies on the side.
-
- 10+ Years
- Posts: 429
- Joined: Tue Jun 23, 2009 6:59 pm
- Zip Code: 02346
- Tractors Owned: .
1947 Circle Cub #1110
1947 Circle Cub #1316
1948 Cub #43915
1966 Power King
189 two way Plow
54A Blade
144 Cultivator
26 ft Welcraft
1967 Case 530ck Backhoe - Location: Middleboro Massachusetts
Re: farmall cub feaver in Maine
Thats the same thought I had when I saw the picture of the pump. I had that on our Jeepster Comando.
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: farmall cub feaver in Maine
64/67lo-boy wrote:........ It has a pump that has its own resivoir on it, and it runs off the pto. maybe not the best idea when clutch is disengaged no pto. ..............
I would call that an understatement. But several hundred thousand Farmall H's and M's were made without live hydraulics. It beats doing it with a shovel.
Fun is loading gravel or cow exhaust with a trip bucket loader, no live hydraulics, no power steering, and one way cylinders.
Using a trip bucket loader in 12 easy steps;
#1 While driving into pile steering with left hand, push rod with right hand to lower bucket
#2 Push in clutch, take out of gear, release clutch (may or may not need brakes)
#3 Pull lift rod with right hand to raise bucket
#4 Push in clutch, put in reverse, release clutch
#5 Watch where your backing, then push in clutch, put in forward, release clutch
#6 Head for truck, trailer, or spreader watching that bucket is high enough to clear side of same
#6A Bucket can be raised higher as tractor is going forward towards trailer if needed
#6A1 If bucket won't clear by the time you arrive at side of trailer repeat steps #2 and #3 then return to step #6
#7 Push in clutch with load centered over trailer (may or may not need brakes)
#8 Pull trip lever
#9 Shift into reverse, release clutch, watch where you're backing
#10 Push in lift rod to lower bucket to ground after clearing trailer until bucket latches
#11 Pull lift rod to raise bucket
#11A If steps #10 an 11 can't be accomplished because of room repeat step #2
#11B Lower bucket until it latches
#11C Raise bucket to a suitable height and proceed to step #12
#12 Push in clutch, shift to forward and repeat from step #1 a couple dozen times
It definitely beats a shovel, of course if you do this for any length of time it will feel like you've been beaten with a shovel. Remember while doing all this you still have to work the throttle. Sometimes you just literally don't have enough hands to work everything. Done by someone with a little practice and it almost has a ballet quality. Usually though it's more of a slow motion plane crash.
-
- Team Cub Mentor
- Posts: 5633
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: farmall cub feaver in Maine
Good post, Scrivet! How well I remember that drill! You forgot to mention the complications added, when you also have to steer the tractor with the same hands that you're doing everything else with.
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: farmall cub feaver in Maine
There are a lot of Cubs in Maine!
Must have some kind of pulley/sheave on the pto with a bracket for the pump? I have seen that done with a pump for a sprayer rig, never for a loader. Several advantages to running it on the TC, one is the pressure is regulated.
Must have some kind of pulley/sheave on the pto with a bracket for the pump? I have seen that done with a pump for a sprayer rig, never for a loader. Several advantages to running it on the TC, one is the pressure is regulated.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 1173
- Joined: Thu Jun 10, 2010 6:56 am
- Zip Code: 49053
- Circle of Safety: Y
- Location: Galesburg, MI
Re: farmall cub feaver in Maine
May I add to Scrivetts post. Park spreader far enough from barn so loader can be raised from low enough to clear barn to high enough to clear spreader without stopping. Vern
- Goraidh (Jeff)
- 10+ Years
- Posts: 840
- Joined: Tue Mar 23, 2010 11:00 pm
- Zip Code: 04236
- Tractors Owned: '49 Cub "Jessie"
'64 Cub "Alex" - Circle of Safety: Y
- Location: Maine
- Contact:
Re: farmall cub feaver in Maine
"There are a lot of Cubs in Maine! " Heck, Larry, don't let Barnyard get wind of this. He'll wipe us out.
'49 Cub (#77786) "Jessie"
"64 Farmall Cub (#224657) "Alex"
Woods 42C-6
C-3 mower
Cub 54 Blade
193 Moldboard plow
Cub L-38 disc harrow
Cub-144 Cultivator
Cordwood Saw
"64 Farmall Cub (#224657) "Alex"
Woods 42C-6
C-3 mower
Cub 54 Blade
193 Moldboard plow
Cub L-38 disc harrow
Cub-144 Cultivator
Cordwood Saw
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: farmall cub feaver in Maine
Not to worry Jeff..... they are too pricey in Maine. Except for the one I got a few years back My favorite Cub!
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: farmall cub feaver in Maine
Gary Dotson wrote:Good post, Scrivet! How well I remember that drill! You forgot to mention the complications added, when you also have to steer the tractor with the same hands that you're doing everything else with.
Very True!
Also another complication I left out between steps 1 and 2 is our Farmall H would always raise the front wheels off the ground about a foot when really digging good and kicking the clutch in would let the front end slam back down onto the ground. You had to hit the clutch before stalling the tractor and time the brakes so they engaged at the same moment the clutch released to keep the front end hanging. Then ease off on the brakes to slowly lower the front end back onto the ground.
Who is online
Users browsing this forum: Mcdaniel2903, mcwinter and 35 guests