2 New to me cubs

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
gusbratz
Cub Star
Cub Star
Posts: 167
Joined: Sun Nov 25, 2012 12:03 pm
Zip Code: 16345

Re: 2 New to me cubs

Postby gusbratz » Sun Dec 02, 2012 5:57 pm

i'm still confused by this magneto rotor, when the #1 cyl hits TDC the magneto snaps and i find the rotor at about 2:00 or closer to 3:00. so i took out the 2 screws and moved the little rotor back to 12:00 after the snap and 10 or 11 right before the snap. and the cub started right up and ran like the wind. i drove it around a bit and put a timeing light on it and the thing seems to be fireing about 1" before the TDC mark on the flywheel.
then i started working on the 59, the yellow and white one. it has the dist. not the mag type ignition. i rolled it to TDC #1 and pulled the dist apart and find the rotor pointing to the 2:00 position. now why wouldn't it be lined up to 12:00? I am assumeing it ran before it was left for dead. and this seal looks bad too because oil came poruing out of it when i took the dist off, or is it supposed to have engine oil in that gear reduction unit?


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 3 guests