This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Cub hydraulic pump Parts

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Sharkmaster
10+ Years
10+ Years
Posts: 3
Joined: Fri Jun 10, 2011 12:33 pm
Zip Code: 06109

Cub hydraulic pump Parts

Postby Sharkmaster » Fri Jun 10, 2011 12:50 pm

1953 Cub recent purchase. When I got it the touch control pump and lines were removed and both areas blocked off with plates. I have the pump and the lines and am planning on a reinstallation to figure out if it works or leaks or that there was a reason why it was removed. I am starting with the pump that I split in two to make sure that there wasn't any dirt or debris inside. In between the 2 gears on one side of them was a black blob of plastic. I removed it as it looked more like RTV that got into the system and lodged there than a machined part. I see a part called a bearing seal pin. #10 on most parts illustrations from IH. Is this what I removed? Was it really plastic? Do I need it? Can I gt it?

SPONSOR AD

Sponsor



Sponsor
 

User avatar
ToddW
Cub Pro
Cub Pro
Posts: 2293
Joined: Tue Sep 02, 2008 3:46 pm
Zip Code: 54911
Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby ToddW » Fri Jun 10, 2011 1:12 pm

viewtopic.php?f=11&t=44196

Welcome to the forum!
this "How to" covers the parts very well in the rebuild

Sounds like an O ring remains/scrap in there to me

Sharkmaster
10+ Years
10+ Years
Posts: 3
Joined: Fri Jun 10, 2011 12:33 pm
Zip Code: 06109

Re: Cub hydraulic pump Parts

Postby Sharkmaster » Fri Jun 10, 2011 1:32 pm

I will look Thanks Great forum

User avatar
ToddW
Cub Pro
Cub Pro
Posts: 2293
Joined: Tue Sep 02, 2008 3:46 pm
Zip Code: 54911
Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby ToddW » Fri Jun 10, 2011 1:35 pm

The link I posted should take you right to the topic on the pump rebuild.
Sounds like you are off to a great start in fixing the issue!

Sharkmaster
10+ Years
10+ Years
Posts: 3
Joined: Fri Jun 10, 2011 12:33 pm
Zip Code: 06109

Re: Cub hydraulic pump Parts

Postby Sharkmaster » Fri Jun 10, 2011 2:20 pm

It looks like I can rebuild from that great post. I do however see a part as a bearing seal pin. Because it is installed it is hard to make out what it looks like but is a part and mine was damaged. I assume that that seal and gasket kit is available and should include that pin

User avatar
ToddW
Cub Pro
Cub Pro
Posts: 2293
Joined: Tue Sep 02, 2008 3:46 pm
Zip Code: 54911
Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower
Circle of Safety: Y

Re: Cub hydraulic pump Parts

Postby ToddW » Fri Jun 10, 2011 2:25 pm

TM tractor is a site sponsor and have great service and reasonable prices

http://www.tmtractor.com/new/hy/288fp.htm

here is the kit, no key/pin though

maybe Case IH sells the pin, not sure

User avatar
Arthur Luke
Cub Pro
Cub Pro
Posts: 852
Joined: Fri May 09, 2008 2:47 pm
Zip Code: 74022
Tractors Owned: 8 F Cubs, 7 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
Circle of Safety: Y
Location: OK, Copan

Re: Cub hydraulic pump Parts

Postby Arthur Luke » Fri Jun 10, 2011 4:53 pm

If you look at TM's picture of the kit, that little black dot towards the bottom is the pin.
Depending on which version of the pump you have, it may not use the bushing seal pin.
Have a good day, Art Image
Circle of Safety

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 17446
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Cub hydraulic pump Parts

Postby Don McCombs » Fri Jun 10, 2011 5:41 pm

When new, the seal looks like a miniature hockey puck. Yes, you need it. No, you can't buy it seperately. You'll need to buy the whole pump rebuild kit. Might as well do the whole job while you have it split. :D
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor

The Ridge
10+ Years
10+ Years
Posts: 1
Joined: Tue Dec 04, 2012 8:00 pm
Zip Code: 24067

Re: Cub hydraulic pump Parts

Postby The Ridge » Wed Dec 05, 2012 3:30 pm

Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one?
Dan

User avatar
ricky racer
10+ Years
10+ Years
Posts: 6315
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: Cub hydraulic pump Parts

Postby ricky racer » Wed Dec 05, 2012 4:53 pm

Sharkmaster wrote:I will look Thanks Great forum


Best Cub website on the planet!!!!!! :big afro:
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 17446
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Cub hydraulic pump Parts

Postby Don McCombs » Wed Dec 05, 2012 5:39 pm

Dan,

Your chances of finding just the drive gear are pretty slim. Your best bet will be to look for a reasonably priced used pump. Post a "wanted" ad here and keep an eye out on eBay.
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 20344
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Cub hydraulic pump Parts

Postby Eugene » Wed Dec 05, 2012 6:22 pm

The Ridge wrote:Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one? Dan
Is it the drive gear off the front of the hydraulic pump? If you need one of the gears inside the pump, then you need to purchase a complete hydraulic pump. In any event, you can advertise in the for sale/wanted section of this site.
I have an excuse. CRS.

Alan Riley
10+ Years
10+ Years
Posts: 449
Joined: Wed Feb 05, 2003 11:49 pm
Zip Code: 71328
Location: LA, Deville

Re: Cub hydraulic pump Parts

Postby Alan Riley » Thu Dec 06, 2012 11:39 am

About 10 years ago I priced just the drive gear at my local Case-IH dealership. I seem to recall them wanting around $135 for one back then. :cry:
Old Age: The phase of life when nothing works and everything hurts...

User avatar
Hengy
10+ Years
10+ Years
Posts: 7153
Joined: Sat Feb 18, 2006 8:12 pm
Zip Code: 15101
eBay ID: lacrosseorgans
Skype Name: Mike.Hengelsberg
Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow
Circle of Safety: Y
Location: PA, Allison Park (Am Hengelsberg)
Contact:

Re: Cub hydraulic pump Parts

Postby Hengy » Thu Dec 06, 2012 1:22 pm

Did your gear get all chewed up or is it missing (as in came off the shaft)...
Mike (Happy as a Lark in Allison Park, PA)
Image Image

Check out my Restoration Thread (1955 Cub, Lewis)

User avatar
Denny Clayton
10+ Years
10+ Years
Posts: 4565
Joined: Wed Feb 05, 2003 1:18 pm
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety: Y
Location: OH, Sidney

Re: Cub hydraulic pump Parts

Postby Denny Clayton » Thu Dec 06, 2012 4:50 pm

The Ridge wrote:Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one?
Dan

Have you looked in the oil pan?
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty" (CubTug winner 2007 & 2009)
Image
Member of Ohio Chapter 6
Circle of Safety


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 33 guests