Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
several of them were a fair amount under spec of 45 FT/LBS.
I don't really know how much in FT?LBS a fair amount is! Then again i have seen people reuse head bolts which is supposed to be a no no because of the stretch. Would we advocate removing, cleaning and adding sealant before reinstalling? Would we advocate replacing the ones a fair amount under spec? W ere they so loose one could fit a finger nail between the bolt head and the engine head?
As you can see from my earlier post on this subject I am skeptical that the retorquing will fully give the desired result but it just might help. Then again what type of sealant was used? Does it harden?
Too many questions for my little brain.
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Cub Pro
- Posts: 7701
- Joined: Thu Aug 19, 2004 2:31 pm
- Location: NY Staten Island & Franklin
- Zip Code: 10314
I used the aviation gasket sealer on the threads, but you could use PTFE pipe dope in a pinch.
If you have bolt showing a gap - yep you should dig deeper. Yes - I would not reuse head bolts, but only because of the corrosion - the ones I took off the '65 were necked down by corrosion. Head gaskets don't like the clamp removed off them, but one bolt may not cause an issue.
- Cub Star!!
- Posts: 339
- Joined: Tue Apr 17, 2012 7:55 pm
- Location: Indiana
- Zip Code: 47119
- Skype Name: ntrenn
- Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
59L mower mounted on the Fcub
23A Disc - lost possession
Return to Farmall Cub
Who is online
Users browsing this forum: 56cub and 14 guests