electrical problem-farmall H

Farmall H, HV & Super H, 1939-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

electrical problem-farmall H

Postby henry woll » Tue Aug 30, 2005 10:20 am

hi folks-just need to know if there is any electrical whiz out there that can help-my ammeter started going negativ about 5 amps when the tractor was running-i replaced the generator which i think was original delco or close to it-kept the regulator-polarized as instructrd and ran it-still shows a neg 5 amps-any ideas or fixes out there?-thanks hank :roll:
henry woll
5+ Years
5+ Years
 
Posts: 12
Joined: Wed Jun 29, 2005 10:50 am
Location: new york-finger lakes area

Postby Bigdog » Tue Aug 30, 2005 10:30 am

sounds like the regulator is stuck. Ground the F terminal on the generator and see if it charges then. If it does, either replace the regulator or open it up and look for burned or sticking contacts.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23820
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

farmall H electrical prob

Postby henry woll » Sat Sep 10, 2005 4:53 pm

hi BD-well i checked the wiring-looks fine-used ohmmeter to look for shorts-found none-regulator has clean points-one set closed -the other open-closed set shows a spark when i open them up-tried that before when running to see if i had a charge-it went more negative-nothing looks burned-what's next-maybe a new regulator?-thanks-hank
henry woll
5+ Years
5+ Years
 
Posts: 12
Joined: Wed Jun 29, 2005 10:50 am
Location: new york-finger lakes area

electrical problem on an H

Postby henry woll » Tue Sep 13, 2005 9:07 am

hi BD-i put the meter on at rest-reads 6.05 volts -at 1/2 throttle or so it reads 6.01 volts-that tell you anything?-i was thinking i might need to take the generator and regulator to the shop and have it run up and checked out-possibly a lemon rebuilt??-let me know-i am going to alberta tomorrow for a few days-i'll contact you as soon as i get back-hank
henry woll
5+ Years
5+ Years
 
Posts: 12
Joined: Wed Jun 29, 2005 10:50 am
Location: new york-finger lakes area

Postby beaconlight » Tue Sep 13, 2005 9:10 am

henry I know this is off topic but you live in one beautiful part of the country in the finger lakes.

Bill Sorensen
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop
User avatar
beaconlight
Cub Pro
Cub Pro
 
Posts: 7701
Joined: Thu Aug 19, 2004 2:31 pm
Location: NY Staten Island & Franklin
Zip Code: 10314

Postby Bigdog » Tue Sep 13, 2005 10:03 am

Hank, I believe that is the next step. It wouldn't be the first bad rebuilt unit. Before you do that though, make sure your grounds are good.
Did you try the same test with the field terminal of the generator grounded?
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23820
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby John *.?-!.* cub owner » Tue Sep 13, 2005 12:04 pm

"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19457
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Postby Matt Kirsch » Tue Sep 13, 2005 2:54 pm

Did you try grounding the F terminal?
Matt Kirsch
10+ Years
10+ Years
 
Posts: 3347
Joined: Tue Jun 08, 2004 3:04 pm
Location: Rochester, NY
Zip Code: 14559
Circle of Safety Award
Circle of Safety: Y

h electrical prob

Postby henry woll » Wed Sep 21, 2005 11:56 am

hi bd-no i didn't-youy mean check voltage running and ground the f terminal?
henry woll
5+ Years
5+ Years
 
Posts: 12
Joined: Wed Jun 29, 2005 10:50 am
Location: new york-finger lakes area

Postby Bigdog » Wed Sep 21, 2005 5:14 pm

Yes, ground the F terminal on the generator and start it up. Check the voltage at half throttle or higher. If it's charging, it will read 7 volts or higher. This will tell you whether the regulator circuit or the generator circuit is the problem. Once you know that, we can proceed.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23820
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

h electrical problem

Postby henry woll » Thu Sep 22, 2005 9:36 am

hi john-i printed yor chart but didn't get all the way to the bottom-maybe my printer is off-what does the box below #4 say after generator on the left and replace voltage on the right?-hank
henry woll
5+ Years
5+ Years
 
Posts: 12
Joined: Wed Jun 29, 2005 10:50 am
Location: new york-finger lakes area

h electrical problem

Postby henry woll » Thu Sep 22, 2005 9:53 am

hi BD-i'll try that f terminal thing this am-and john-when your chart says regulator base does it mean the case of the regulator?-thanks-hank
henry woll
5+ Years
5+ Years
 
Posts: 12
Joined: Wed Jun 29, 2005 10:50 am
Location: new york-finger lakes area

h electrical prob-

Postby henry woll » Thu Sep 22, 2005 10:15 am

hi BD-i grounded the f terminal-started it up-got 5.9 volts at the battery terminals-what next?-hank
henry woll
5+ Years
5+ Years
 
Posts: 12
Joined: Wed Jun 29, 2005 10:50 am
Location: new york-finger lakes area

Postby Donny M » Thu Sep 22, 2005 10:51 am

Sounds to me that the generator ain't generatin. What did the voltage read before you started the tractor :?:
8)
Donny M
5+ Years
5+ Years
 

h electric problem

Postby henry woll » Fri Sep 23, 2005 10:48 am

hi-i think the gen may not be working-i'll take it in today to have it checked-my luck with rebuilts has always been lousy-thanks-hank
henry woll
5+ Years
5+ Years
 
Posts: 12
Joined: Wed Jun 29, 2005 10:50 am
Location: new york-finger lakes area

Next

Return to Farmall H & Super H

Who is online

Users browsing this forum: No registered users and 2 guests