This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Penetrating Oils Revisted
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 5205
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Penetrating Oils Revisted
I thought this would make for a good read, I have been using the laquer thinner/atf mix for years myself using spray bottles
Tim
Penetrating Oils
Machinist's Workshop MagT recently published some information on various penetrating
oils that I found very interesting. Some of you might appreciate this. The magazine reports
they tested penetrates for break out torque on rusted nuts.
They are below, as forwarded by an ex-student and professional machinist. They arranged
a subjective test of all the popular penetrates with the control being the torque required to
remove the nut from a "scientifically rusted" environment.
*Penetrating oils ........... Average torque load to loosen*
No Oil used ................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster ...................... 214 pounds
Liquid Wrench ...............127 pounds
Kano Kroil ..................... 106 pounds
ATF*-Acetone mix............53 pounds
The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic transmission fluid and
acetone. Note this "home brew" released bolts better than any commercial product in this
one particular test.
Our local machinist group mixed up a batch and we all now use it with equally good results.
Note also that "Liquid Wrench" is almost as good as "Kroil" for about 20% of the price.
Steve from Godwin-Singer says that ATF-Acetone mix is best, but you can also use ATF
and lacquer thinner in a 50-50 mix. *ATF=Automatic Transmission Fluid
Tim
Penetrating Oils
Machinist's Workshop MagT recently published some information on various penetrating
oils that I found very interesting. Some of you might appreciate this. The magazine reports
they tested penetrates for break out torque on rusted nuts.
They are below, as forwarded by an ex-student and professional machinist. They arranged
a subjective test of all the popular penetrates with the control being the torque required to
remove the nut from a "scientifically rusted" environment.
*Penetrating oils ........... Average torque load to loosen*
No Oil used ................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster ...................... 214 pounds
Liquid Wrench ...............127 pounds
Kano Kroil ..................... 106 pounds
ATF*-Acetone mix............53 pounds
The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic transmission fluid and
acetone. Note this "home brew" released bolts better than any commercial product in this
one particular test.
Our local machinist group mixed up a batch and we all now use it with equally good results.
Note also that "Liquid Wrench" is almost as good as "Kroil" for about 20% of the price.
Steve from Godwin-Singer says that ATF-Acetone mix is best, but you can also use ATF
and lacquer thinner in a 50-50 mix. *ATF=Automatic Transmission Fluid
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Penetrating Oils Revisted
Been down this road before. Only problem is that acetone and ATF don't mix.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Penetrating Oils Revisted
As Bob said, we have been down this road more than once discussing the relative merits of the Acetone and ATF Mix. To me Acetone, a volatile organic compound (VOC) will evaporate rather quickly probably leaving just the ATF. So not sure how efficacious Acetone and ATF really is.
I heard at one point that ATF was good at freeing up stuck pistons -- so I tried an experiment on Jethro's mill. Guess what After a number of months dutifully pouring a bit of ATF on the pistons daily, Jethro's mill is still stuck.
As far as penetrating oils, I still stand by Solvo-Rust, Kroil and Nut Buster That is JIMHO.
I heard at one point that ATF was good at freeing up stuck pistons -- so I tried an experiment on Jethro's mill. Guess what After a number of months dutifully pouring a bit of ATF on the pistons daily, Jethro's mill is still stuck.
As far as penetrating oils, I still stand by Solvo-Rust, Kroil and Nut Buster That is JIMHO.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- grumpy
- Cub Pro
- Posts: 2780
- Joined: Tue Jan 10, 2006 12:03 am
- Zip Code: 15522
- Circle of Safety: Y
- Location: PA. Bedford (Centerville)
Re: Penetrating Oils Revisted
Kroil has always worked for me. I'm the type of person that figures...if it works I aint gonna fix it.
David Dee Mock-Leonard
Nothing is foolproof to a sufficiently talented fool.
Some days it's not worth chewing through the restraints
Nothing is foolproof to a sufficiently talented fool.
Some days it's not worth chewing through the restraints
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: Penetrating Oils Revisted
Working for a large corporation as a shop mechanic, we sprayed the flavor of the month provided to us by the case which would usually last about one month.
Almost never the same product twice in a row, almost never a brand mentioned in other posts, mostly no name canned solvents provided by industrial supply houses, all working or not working about the same.
Then we got a case of Kano Aerokroil. Everyone took notice. This stuff loosened fasteners that in some cases, looked as if no threads existed. It was clearly a cut above the rest. It was the talk of the lunch room, the new mystery oil.
Of course when it was gone it was gone, most of us thinking so highly of it, buying it ourselves for personal use. I just used some today on a corrosion job which I initially saw no outcome except breakage, again, Aerokroil proved me wrong.
The last can I bought directly from Kano with a coupon I found online making it comparable in cost to WD at full price.
Right now they have a better deal going than I got.
The current special partners with Google, 2 king size cans delivered for $18.00 What a deal. Finally an answer to my wife's forever nagging "what do you want for Christmas" question.
http://www.kanolabs.com/google/
Almost never the same product twice in a row, almost never a brand mentioned in other posts, mostly no name canned solvents provided by industrial supply houses, all working or not working about the same.
Then we got a case of Kano Aerokroil. Everyone took notice. This stuff loosened fasteners that in some cases, looked as if no threads existed. It was clearly a cut above the rest. It was the talk of the lunch room, the new mystery oil.
Of course when it was gone it was gone, most of us thinking so highly of it, buying it ourselves for personal use. I just used some today on a corrosion job which I initially saw no outcome except breakage, again, Aerokroil proved me wrong.
The last can I bought directly from Kano with a coupon I found online making it comparable in cost to WD at full price.
Right now they have a better deal going than I got.
The current special partners with Google, 2 king size cans delivered for $18.00 What a deal. Finally an answer to my wife's forever nagging "what do you want for Christmas" question.
http://www.kanolabs.com/google/
- Attachments
-
- 1355284457-picsay.jpg (57.58 KiB) Viewed 2100 times
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Penetrating Oils Revisted
as I have said before I will stick with the liquid wrench, if I have to buy it , I have used ATF mixed with paint thinner . seamed to work fine but the spray bottles do not last with the paint thinner, Kroil is not worth the price as far as I am concerned.
And I expect I go through as much penetrating oil as anyone. and Kroil always runs out of pressure before it runs out of Kroil.
Boss
And I expect I go through as much penetrating oil as anyone. and Kroil always runs out of pressure before it runs out of Kroil.
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: Penetrating Oils Revisted
Boss Hog wrote: and Kroil always runs out of pressure before it runs out of Kroil.
Can't say I've ever experienced that. But if I did, I would simply puncture the can and pour the remaining contents into a pump can or air pressurized sprayer, no big deal.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Penetrating Oils Revisted
What I usually see is people spritzing a bolt with penetrant, slapping a wrench on it within seconds, twisting the bolt off, and cursing the penetrant. "That *bleep* ain't no good!"
Ya gotta give the stuff some time to work. If you just spritzed it and the bolt turns right out, it wasn't stuck in the first place. When the threads come out DRY, the penetrant didn't do you a bit of good.
We used to use a product called "Panther" from Massey Ferguson. Smelled like the Southbound end of a Northbound skunk, so we called it skunk oil or panther p(you fill in the rest). Swore the stuff was magic, but mostly the bolts weren't stuck in the first place.
Ya gotta give the stuff some time to work. If you just spritzed it and the bolt turns right out, it wasn't stuck in the first place. When the threads come out DRY, the penetrant didn't do you a bit of good.
We used to use a product called "Panther" from Massey Ferguson. Smelled like the Southbound end of a Northbound skunk, so we called it skunk oil or panther p(you fill in the rest). Swore the stuff was magic, but mostly the bolts weren't stuck in the first place.
- BIGHOSS
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Penetrating Oils Revisted
I use a product with great success called "Blue Flame Wrench".
"Courage is being scared to death-but saddling up anyway".......John Wayne
- Redcub
- 10+ Years
- Posts: 310
- Joined: Sun Apr 17, 2011 12:19 am
- Zip Code: 97000
- Tractors Owned: 47'Cub S/N 9516. Howard CD6 Despeeder, Howard L&S-28 Rotovators, broken front end loader, Hub City PTO clockwise converter/rpm reducer, Cub tach, Old style pointer hands analog Hobbs meter, Donaldson pre-cleaner, C-22 Sickle bar. Sears flat belt drive Buzz Saw, Model 54 blade, IH plow, Delco horn.
- Circle of Safety: Y
- Location: Oregon, USA ( the left coast )
Re: Penetrating Oils Revisted
Next time you are out here in the Pacific NW see us at
The Great Oregon Steam Up in Brooks Ore, along Interstate-5 just North of Salem
http://www.antiquepowerland.com Held the last weekend of July, and 1st weekend of August
"Steam and Gasoline"
The Great Oregon Steam Up in Brooks Ore, along Interstate-5 just North of Salem
http://www.antiquepowerland.com Held the last weekend of July, and 1st weekend of August
"Steam and Gasoline"
-
- 10+ Years
- Posts: 62
- Joined: Sun Dec 09, 2012 11:22 am
- Zip Code: 36303
- Tractors Owned: !
'52 Cub - Circle of Safety: Y
Re: Penetrating Oils Revisted
Kroil is quite good, but expensive at retail. Occasionally it will go on sale at one of the internet gunsmith suppliers like Midway USA - I bought a quantity of 8oz non-aerosol cans for $3 each a couple of years ago.
Acetone is nasty stuff. If you insist on using it, research proper handling - Seriously.
You can substitute MEK for acetone and mix that with ATF to produce a good penetrating agent and MEK is safer in general use than acetone. Also a great substitute for Ed's Red, which is an excellent gun cleaning product.
Acetone is nasty stuff. If you insist on using it, research proper handling - Seriously.
You can substitute MEK for acetone and mix that with ATF to produce a good penetrating agent and MEK is safer in general use than acetone. Also a great substitute for Ed's Red, which is an excellent gun cleaning product.
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: Penetrating Oils Revisted
tst wrote:Penetrating Oils
Machinist's Workshop MagT recently published some information on various penetrating
oils that I found very interesting. Some of you might appreciate this. The magazine reports
they tested penetrates for break out torque on rusted nuts.
They are below, as forwarded by an ex-student and professional machinist. They arranged
a subjective test of all the popular penetrates with the control being the torque required to
remove the nut from a "scientifically rusted" environment.
*Penetrating oils ........... Average torque load to loosen*
No Oil used ................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster ...................... 214 pounds
Liquid Wrench ...............127 pounds
Kano Kroil ..................... 106 pounds
ATF*-Acetone mix............53 pounds
The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic transmission fluid and
acetone. Note this "home brew" released bolts better than any commercial product in this
one particular test.
Our local machinist group mixed up a batch and we all now use it with equally good results.
Note also that "Liquid Wrench" is almost as good as "Kroil" for about 20% of the price.
Steve from Godwin-Singer says that ATF-Acetone mix is best, but you can also use ATF
and lacquer thinner in a 50-50 mix. *ATF=Automatic Transmission Fluid
I must be the only person in the world that has actually read the article!
The last test you want is a "subjective test", you want an objective test.
Eitherway, there were no bolts, no torque, no nuts, no "scientifically rusted" environment, no ATF-acetone mix. Basically the article was from a well meaning person but is not very useful and I doubt has any real accuracy. Bogus
This person rusted steel dowel pins in reamed holes for somewhere around 12 hours in saltwater, measured the force, not torque, to push out the pins. A total of 3 pins per test. The ATF was really power steering fluid. No data was listed and no statistical analysis was presented. Without seeing the actual data we will never know for sure but a sample size of 3 per oil is likely completely useless.
I did a study that came out in Green magazine , May 2010, comparing oils using the same pin method, also included bolts and nuts. Rusted in an alternating salt water bath and air dry for 6 months. Larger study with statistical analysis and I got much different results. I believe I did 6 pins and 20 bolts for each oil. I did not calculate the power for the statistics but I expect you would need several hundred samples per oil to get any real validity. However, in my study there was no difference in the oils tested including ATF-Acetone
When folks say " I use brand X and it is the best" I think...how do you know? If all stuck bolts were essentially the same then getting results with a brand of oil would be useful but there is so much variability with stuck bolts that I am not sure " brand X works better than Brand Y " statements are all that useful.
I wrote to several companies including Kroil asking for any peer reviewed publications that supported their claims of superiority. The only one that responded was PB Blaster. Several request to Kroil went unanswered so I take their lack of response as an indication that they have no data to support their claims. PBBlaster did have some data but they only shared their ATF-Acetone test, not any with competitors.
What does all that mean? They likely all perform basically the same including WD-40 which is a penetrating oil also. Some may work slightly better with wet rusted bolts, some better with dry rusted bolts, some better with bolts seized in aluminum, etc..
If you are happy with Kroil, PB Blaster, mouse urine, then that is what I would use. I am now using Kroil since I stumbled onto 2 gallons. Once it is gone then I would go back to PB Blaster or Wal Mart. The engineer at PB Blaster that discussed their testing with me restores old Case tractors so at least we have something in common.
ATF-Acetone does not mix in a 50-50 ratio. Not sure what the correct ratio is but it is not 50-50.
If I was going to make my own, I would use an oil, ATF is fine, a polar solvent such as acetone, a polar protonic solvent such as isopropyl alcohol ( not rubbing alcohol but "heet" brand of fuel line deicer), and mineral spirits to thin. I have no idea It will work any better than others but makes more sense than ATF-acetone in a 50-50 mix.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Penetrating Oils Revisted
I found out if PB Blaster or Kroil doesn't loosen it up then i end up drilling it out and retapping the threads. Installing a stainless heli-coil insert is another option. All of the assemblies i did for the US Goverment was heli coiled. (155mm howitzers for the US ARMY)
Thru experience with stuck threaded holes i find its easier to heat half the hole so it will expand the hole rather than heat the whole area and expand the whole thing together. I have had more success heating half the hole.
Thru experience with stuck threaded holes i find its easier to heat half the hole so it will expand the hole rather than heat the whole area and expand the whole thing together. I have had more success heating half the hole.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Penetrating Oils Revisted
Kroil in a spray can with a straw.... easy to get the right amount in the right place. And it works. I have not broken a bolt since I started using it (the radiator at the Perry mini-fest doesn't count). A spray bottle of anything is just too messy and easy to miss the target and get it all over the place. The big cans do run out of pressure before they run out of Kroil, that goes in a container after I find the church key and goes on with an acid brush.
WD-40 is good for something.... getting bolts loose isn't one of them.
WD-40 is good for something.... getting bolts loose isn't one of them.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 54
- Joined: Sun Aug 01, 2010 8:06 am
- Zip Code: 37075
Re: Penetrating Oils Revisted
I use a modified Ed's red. A 50-50 mix of kerosene and ATF. For me the big factor is time. What ever you use if you don't give it time to work(knocking it with a hammer now and then helps a lot) you are wasting time and product. In my toolroom(retired supervisor)I bought Kroil by the gallon. The guys liked it better than anything else we tried and we tried them all. Here again time was the key. Just my two cents.
Who is online
Users browsing this forum: No registered users and 26 guests