Ok, So the old seal is nearly an inch thick and the image on messicks shows a standard thin oil seal! I can find no oil seal listed that fits this application in either a timkin or national oil seal catalog so this has me stumped!
Now for the two main questions,
1) Can I fit two seals in the holder or will only one fit?
2) Does anyone have a number for the oil seal itself so I can simply order it the a parts store for less then IH wants?
Nothing against IH but they mark some parts up by 300% or more!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Planter drive oil seal?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 81
- Joined: Sun Jan 29, 2012 8:26 pm
- Zip Code: 58075
- Location: Wahpeton ND
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Planter drive oil seal?
From ATIS:
Federal Mogul 472070
National 14702, 472070
CR 18104 (use 2)
National 470267SSR
CR 512309BT
One seal will be enough.
Federal Mogul 472070
National 14702, 472070
CR 18104 (use 2)
National 470267SSR
CR 512309BT
One seal will be enough.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Planter drive oil seal?
Federal Mogul 472070
National 14702, 472070
CR 18104 (use 2)
National 470267SSR
CR 512309BT
You will not find the old rawhide seal. Old technology. They have been replaced by new materials like nitrile. Do not use 2. The outer one will run dry and then allow dirt to pack in between them. One skinny one will allow you to position a new seal in a spot that is not worn.....sometimes
Info from A.T.I.S. http://www.atis.net/CubFAQ/cub_faq.html#q7
National 14702, 472070
CR 18104 (use 2)
National 470267SSR
CR 512309BT
You will not find the old rawhide seal. Old technology. They have been replaced by new materials like nitrile. Do not use 2. The outer one will run dry and then allow dirt to pack in between them. One skinny one will allow you to position a new seal in a spot that is not worn.....sometimes
Info from A.T.I.S. http://www.atis.net/CubFAQ/cub_faq.html#q7
- Yogie
- Cub Pro
- Posts: 5238
- Joined: Sat Sep 08, 2007 3:49 pm
- Zip Code: 25271
- eBay ID: yogiefisher
- Tractors Owned: 37 John Deere A
63 Farmall Cub
53 Farmall Cub
56 Farmall Cub
IH 140
Massey 165 & 250 - Circle of Safety: Y
- Location: WV. Ripley
Re: Planter drive oil seal?
There's also a rubber O ring behind the Nut that may need be replaced.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
Ben Franklin
Who is online
Users browsing this forum: No registered users and 26 guests