Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Definitely replace! Looks like in the middle of the weld there is another crack again. My rule is if your pulling off something that has been repaired like a final, front bolster, front axle ect. REPLACE IT. Lol. It's not worth the time and new parts patching up junk. Put a good piece on it and KNOW it's fixed. Just my .02 cents... Looks like a good tractor and deserves good parts
That is because they didnt clean up the weld before painting. That is slag that is cracked...
Also, the two rear holes in the diff case have been drilled and tapped to the next size, Im assuming it either ripped the threads out when it broke, or the bolts broke off and they had to drill them out.
I will sell you a finial for $100 and give you a transmission case if you want to replace it
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
A year ago, I bought a "new" final from Boss, cleaned it up, replaced the seals and repainted it and swapped finals out at DSCF...sure was easier than messing around with the old one, and now I don't have to worry about it. THANKS BOSS!!
Who is online
Users browsing this forum: twotone and 4 guests