This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch Control Rebuild
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 9
- Joined: Sat Oct 20, 2007 5:08 pm
- Zip Code: 37664
- Tractors Owned: 1948 cub, 1959 cub, 152 disc plow, pickup disc, grader blade, cycle mower, set of cultivators.
- Location: East Tenn
Touch Control Rebuild
Finished rebuilding TC and used Indian Head gasket seal on cylinder head and block cover gaskets. When reassembling/tightening the block I noticed gasket seal oozing out between head plate and gasket. My question is should I removne the cylinder head and block and check for too much gasket seal. Haven't added hydraulic fluid yet.
1959 Cub
152 Disk Plow
C2 Belly Mount Mower
Cub 22 Mower
Snow Blade
Pick Up Disk
152 Disk Plow
C2 Belly Mount Mower
Cub 22 Mower
Snow Blade
Pick Up Disk
- tmays
- 10+ Years
- Posts: 3402
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
- Hengy
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
- Contact:
Re: Touch Control Rebuild
If it e's oozing out between the head and th gasket, I hope that it isn't oozing into the passages of the TC block. I fear that your gasket might be bad now if you remove it, so best prepare for that possibility.
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Touch Control Rebuild
There is no need to remove the parts. Indian Head that is exposed will dissolve in the fluid. If you need to remove it, it won't damage the gaskets. It's not a glue and sets up hard. Easy persuasion with a knife and you can peel the gasket back off whole and un-damaged.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 9
- Joined: Sat Oct 20, 2007 5:08 pm
- Zip Code: 37664
- Tractors Owned: 1948 cub, 1959 cub, 152 disc plow, pickup disc, grader blade, cycle mower, set of cultivators.
- Location: East Tenn
Re: Touch Control Rebuild
Thanks guys, believe I will leave as and reinstall.
1959 Cub
152 Disk Plow
C2 Belly Mount Mower
Cub 22 Mower
Snow Blade
Pick Up Disk
152 Disk Plow
C2 Belly Mount Mower
Cub 22 Mower
Snow Blade
Pick Up Disk
Who is online
Users browsing this forum: No registered users and 40 guests