This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Throttle speed-up
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Dusty B
- 10+ Years
- Posts: 1880
- Joined: Wed May 23, 2007 7:35 am
- Zip Code: 61736
- Tractors Owned: '45 SC Case
- Circle of Safety: Y
- Location: IL, Downs
- Contact:
Throttle speed-up
What is the cause of the engine to pick up RPM"S on its own? I can pull the throttle back to an idle and then the engine gradually picks up RPM"S on its own! Can't tell if it is govenor spring not actually returning full back or what? Dusty B
Grandpa's '41 B
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
-
- Team Cub Mentor
- Posts: 20376
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Throttle speed-up
Thinking on this one.
How far, rpm increase, does the engine speed up on it's own?
Edit. New or old issue?
How far, rpm increase, does the engine speed up on it's own?
Edit. New or old issue?
I have an excuse. CRS.
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: Throttle speed-up
Check for binding governor and throttle linkages, or just the opposite, extremely worn linkage clevises and pins.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
-
- Team Cub Mentor
- Posts: 5640
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Throttle speed-up
Dusty, the spring does not return the carb. to idle, the spring increases the speed. Check the linkage, as mentioned above and also check the adjustment of the carb. linkage rod. If nothing is found there, you may have an internal issue with the governor.
- Dusty B
- 10+ Years
- Posts: 1880
- Joined: Wed May 23, 2007 7:35 am
- Zip Code: 61736
- Tractors Owned: '45 SC Case
- Circle of Safety: Y
- Location: IL, Downs
- Contact:
Re: Throttle speed-up
Eugene wrote:Thinking on this one.
How far, rpm increase, does the engine speed up on it's own?
Edit. New or old issue?
Has gone up to approximately half throttle - never let it just go to see when it would quit. Started doing it this fall. It's on my snow blade tractor, may not get attention until warmer weather! Dusty B
Grandpa's '41 B
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Throttle speed-up
Dusty:
I would apply your favourite brand of penetrating oil, liberally, to all of the linkages/connections in the governor circuit. It may be as simple as a little dirt/rust/crud binding up a tad. That would be the easiest route to go for now. If it doesn't solve the problem, in the spring you can delve deeper when it is warmer out.
I would apply your favourite brand of penetrating oil, liberally, to all of the linkages/connections in the governor circuit. It may be as simple as a little dirt/rust/crud binding up a tad. That would be the easiest route to go for now. If it doesn't solve the problem, in the spring you can delve deeper when it is warmer out.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: Throttle speed-up
Do this simple worn linkage troubleshooting step:
Engine off, speed control all the way to the rear, curb idle position. Grasp the lever on the carb side of the tractor that is connected to the governor rockshaft and linked to the carb throttle plate. You should realize no movement in either direction.
Advance the speed control all the way forward to high idle. Again, no movement in either the forward or backward direction should be realized.
Lastly, move the speed control lever to the center of its travel. Grasp the rockshaft lever and this time you should be able to move the lever forward closing the throttle plate.
When testing the lever for movement, don't do it with brute force, just attempt to move it lightly, you will overcome the governor spring if you twist on it too hard defeating the purpose of this test.
If in either speed control lever positions of fully forward or fully backward you are able to move the rockshaft, expect to find damaged or worn governor shaft linkage components.
Engine off, speed control all the way to the rear, curb idle position. Grasp the lever on the carb side of the tractor that is connected to the governor rockshaft and linked to the carb throttle plate. You should realize no movement in either direction.
Advance the speed control all the way forward to high idle. Again, no movement in either the forward or backward direction should be realized.
Lastly, move the speed control lever to the center of its travel. Grasp the rockshaft lever and this time you should be able to move the lever forward closing the throttle plate.
When testing the lever for movement, don't do it with brute force, just attempt to move it lightly, you will overcome the governor spring if you twist on it too hard defeating the purpose of this test.
If in either speed control lever positions of fully forward or fully backward you are able to move the rockshaft, expect to find damaged or worn governor shaft linkage components.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Throttle speed-up
I think you will find trouble in the governor itself
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Throttle speed-up
Boss Hog wrote:I think you will find trouble in the governor itself
Boss
In which case this would be of use : Lurker Carl's Cub Governor Rebuild
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 1573
- Joined: Sun Feb 02, 2003 11:01 pm
- Zip Code: 36310
- Tractors Owned: 1975 IH cub,1948 farmall cub,1979 international 3200 skid steer and a 1974 John deere 350B dozer.
- Location: Abbeville Alabama
Re: Throttle speed-up
Most common reason for what you have described is Item #6.
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
Who is online
Users browsing this forum: No registered users and 53 guests