Good Day all,
I decided to start a new post, I searched distributor & distributer and can't seem to find any size for the bushing required to rebuild the distributor. I did find a part #373 577 R91. Does anyone have the specs so that I can go to a local supplier to get one.
Most parts, I have to ship from the US and shipping and duty is hard on the wallet, plus its a 14 day wait from the time the item is shipped. I would like to have the bushing in hand before I tear this one down.
Thanks once again,
Sean
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Distributor bushing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 53
- Joined: Tue Jan 12, 2010 3:15 pm
- Zip Code: A1K1B4
- Tractors Owned: 1969 cub
2003 mini excavator
2006 Kawasaki Vulcan 900
1993 toro wheelhorse 520h
-
- 10+ Years
- Posts: 5212
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Distributor bushing
that bushing is about 4" long, when i needed one I could find nothing off the shelf, ended up making a new one on the lathe from oil light, i believe its still available from IH for $40-50
Tim
Tim
-
- 10+ Years
- Posts: 53
- Joined: Tue Jan 12, 2010 3:15 pm
- Zip Code: A1K1B4
- Tractors Owned: 1969 cub
2003 mini excavator
2006 Kawasaki Vulcan 900
1993 toro wheelhorse 520h
Re: Distributor bushing
Don't suppose you have the specs? There are a few off shore oil industry suppliers in my area that are very resourceful and helpful...
Sean
Sean
-
- 10+ Years
- Posts: 5212
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Distributor bushing
Sorry I did not save the specs,making one was enough
Who is online
Users browsing this forum: ctltmp, taiterhead and 43 guests