Anything that might not belong on the other message boards!
Moderator: Team Cub
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
14 posts • Page 1 of 1
Rosie and I were too sick to go to the family gathering today, but Melissa and Nick stopped by to celebrate a bit this morning. Santa left me with something I have been wanting for a while but just never got around to picking up.
My old drill is about to give out so this is very timely. A couple of years ago Mel had won an 18 volt Milwaukee I/2" drive impact and gave it to me. This set gives me most everything I need for my projects. I think that little 1/4-in impact driver will come in handy around here.
Mel also has to buy almost anything with IH on it (I need to slow that girl down). I got a few tins I will probably set on a shelf and look at. I'd hate to toss stuff in them and mess them up.
How about the rest of you? Was Santa good to you too?
Got an iPad!!!!
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
We shied away from the commercial stuff this year, and did mostly home made gifts.
From Jan I got a pair of monkey fleece pajama's
From Jaime, our oldest, I got an IH candy Jar she made
And from Julie, (our engineer)I got a magnetic wrist tool and part holder and a cool little magnetic light that can fit in small area and point into any direction
Last edited by Former Member on Tue Dec 25, 2012 4:53 pm, edited 1 time in total.
Some tools...BluePoint tube flaring kit, Matco 8 point socket set, a neat vintage Blackhawk bearing puller and some other misc. SnapOn stuff. Early present was 25 squares of 50 year roof shingles. I was a good boy this year, ho ho ho
Hope you and Rosie feel better
After discussing the item with some friends, Momma E and I got one of these for ourselves. For those times when making a full pot is not reasonable. So far, we have really enjoyed the convenience.
Sorry for the size of the picture.
In the middle of every difficulty lies opportunity. - Albert Einstein
Deep South CubFest
February 13 & 14, 2015
I too have been wanting some portable tools as well so this year Em and the kids decided to get this for me for Christmas:
Makita Makita 18V LXT 1/2 In. Drill/Driver and 1/4 In. Hex Drive Impact Driver (18V - 20V max)
When they bought the set, it came with a third battery
I got me the last 4 Spec Cast Cubs to complete the collection to this date. Also got a TV for the Shop, AWESOME!!
Been wanting to get them but the house remodel has been eating up all my spending money.
Jim the show must have went all around you.
As far as Christmas. plastic leveling blocks for camper, two good cooking spoons, and cookie sheet aslo for camper.
I wasn't very good this year.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
About 6:00 this morning the blizzard condition storm they've been promising started. Blowing like crazy with 5-6 inches so far. Forecast was for 6-12 inches. We'll see what develops.
'60 FH Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
Got some parts for my green project and a seal driver kit from Harbor Freight.
Woke up this morning to alot of white stuff.
Santa was good to me, but I must have made Mother Nature mad.
Guess we did not move far enough south.
Farmall Cub Ol Red # 137572 August 1951
Sometimes, I amaze myself !
If you can not learn to do it well, learn to enjoy doing it badly.
14 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest