Snow in the Berkshires, too
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: Snow in the Berkshires, too
The bolt to adjust the blade cutting angle is in the center of the blade just below where the pin would drop thru for side to side angle adjustment. There are 3 adjustment holes there and yours seems to be in the hole closest to the front. There is a bracket with the rod and spring that bolts there. The rod and spring are laying down. If you move the bolt to the center hole it will stand the blade up and do a much better job. This is the bolt these guys are referring to. Check under the main frame just below the center angle adjusting pin.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Big snow for the N.E., are you ready? Attachment(s)
by Lt.Mike » Mon Mar 13, 2017 8:27 am » in Farmall Cub - 49
- 1096
-
by Lt.Mike
Fri Mar 17, 2017 8:18 am
-
-
- 5
- 245
-
by Glen
Sat Jun 20, 2015 9:19 pm
-
- 7
- 396
-
by Jim Becker
Fri Sep 01, 2017 10:46 pm
-
- 1
- 291
-
by Timber cub
Thu Nov 24, 2016 6:15 am
-
- 7
- 527
-
by BigBill
Wed Jan 04, 2017 10:22 pm
Who is online
Users browsing this forum: Crimson Tim, Larry G and 7 guests