Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
I'll try to come back later on and add some comments on parts changes/paint/holes. But I wanted to throw in a few quick comments on CharlieB's brochure.
First off, thanks for posting the images. I have not seen most of those pictures before. The code "AD-31469-C" identifies the publication. The letter C is a year code, in this case 1974. I don't know the meaning of the second date, "1/74". I've seen it on some publications and not on others. If there is any difference between the 2 dates, the second one is always earlier than the first year code. I suspect the second date may be the date of some approval and the one coded in the publication ID is determined by the (planned?) release date. Sometimes the second date is an open date like this one, others have the year coded. I have seen some with month-year, others as month-day-year, and even some month-day.
Are the pages with the 2 codes stapled together or is one just inserted inside the other? It isn't unusual to find to find one inserted inside another. I have a 154 brochure with 2 different mower brochures stuck inside it. I suspect they have been together since they left a dealer's brochure rack. The code "AD-1335-Y5" is 1970. The final "5" indicates 5 revisions. The secondary date "10-31-W" is 1969. By the way, did you miss a digit in this code? 31335 seems more likely than 1335 as it would be in sequence.
That one's our cub Russell....
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
That one's our cub Russell.... [/quote]
I know. I know
1979 International Cub (Artie),193 plow,22 sickle mower,144 cultivator,54a blade,59" belly mower,wheel weights
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
do you know the month in 76 was your cub built?
I re-checked and the last number I posted doesn't have the other '3' in it. It is '1335'. And you're
right about it being a page placed inside the brochure. A single page and it is an ad for the C-3 and C-4
Rotary Mowers for the International 140 tractor. These middle pages are somewhat stuck together from
dampness. Got them opened enough to check. The Cub brochure is 4 pages that were stapled together.
I assumed that the '1/74' was for the year model being advertised
I remember that I was looking into possibly buying a new one about that time but cost a little more than I could
afford on a paperhanger's salary.
Back in the 50's I lived about a half mile from the old International Plant in Louisville and drove by every day
and would see their lot with hundreds of Cubs lined up in it. some days were F-cubs, some days were Low-boys.
Remember seeing them go from red to yellow & white, but don't remember seeing them go back to red or red
with white hoods. We moved to another part of town and then later to Elizabethtown.
What color is your tractor? And does it have a hood ornament?
Bob, Thanks for setting me straight on the oil holes. It just makes sense that the alternator would not need oil holes when I think about it. Thanks again ...Frank
That would be june 76. Hood ornaments gone by then.
OK, it was a hunch. If it had been 31335 it would have fit more neatly in sequence for 1970. I don't know on a C-4, but a C-3 was made from 1960 to 1980. The version you have could be an update of a brochure from any time back to 1960. The number 1335 is probably in sequence from the time of the first version.
Some of us get deep into this sort of thing. Others couldn't care less. It does sometimes help when sorting out questions like are being discussed in this thread. Other times, some of the pictures are so much older than the brochures that they may not tell anything.
Here is a picture you may relate to. Nobody has posted it lately. It is from the Wisconsin Historical Society McCormick Collection, taken in 1948.
Went outside and looked around today. Here is what I found....
The '78 Cub (S/N 252,896) I've got is all original (hood doesn't look to have ever been removed), and it DOES NOT have holes in the hood. The 1976 (S/N 250,050) and 1977 (S/N 250,230) does have holes. None have the hood ornament and all have the choke cable. All also have black grilles.
Like Jim, I have never seen this particular brochure before or some of the pics. Is there a chance that this brochure could be safely scanned into jpeg's
I hope so. Unfortunately, if pages are stuck because of the water damage, it may not be possible. Even scans of the outside pages would be of interest.
Who is online
Users browsing this forum: thiggy and 9 guests