Wed Jan 02, 2013 8:57 pm
The part # is 358 213 R1, but I wondered if anyone had a crossover # in case the counter guy can't find it (you don't know how often that happens
). I searched the posts and didn't find anything mentioned for the later Cubs. Hope to get it running this weekend when we have some weather in the 30*'s.
Wed Jan 02, 2013 9:04 pm
mine has a 6822 z3k , not sure if the z3k is part of the #
Wed Jan 02, 2013 9:24 pm
i think it is 22 inches
Wed Jan 02, 2013 9:30 pm
that would explain the 22 in the part number thats on the belt
Wed Jan 02, 2013 9:33 pm
Bob NAPA's number is 4L220
Wed Jan 02, 2013 9:40 pm
Thanks guys, if they can't find it at NAPA with a NAPA #, I'll know I'm in real trouble.
Wed Jan 02, 2013 9:46 pm
Bob McCarty wrote:Thanks guys, if they can't find it at NAPA with a NAPA #, I'll know I'm in real trouble.
You never know about some of those guys. If they don't have it tell them to add a W at the end of that number and get the heavy duty belt.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.