replaceing the pto seal on my cub
Moderator: Team Cub
5 posts
• Page 1 of 1
replaceing the pto seal on my cub
by rohrski » Wed Jan 09, 2013 11:33 am
I am trying to replace the pto seal on my 49 cub, Gary mentioned I could possibly drill holes in the seal insert metal screws and pry out, that isn't working, any other ideas without taking the flange off?
Cub owner for the last 10 years, such a well engineered piece of equipment.
49 cub
96 JD 955
66 mustang
49 cub
96 JD 955
66 mustang
-
rohrski - Posts: 46
- Joined: Wed Jun 01, 2011 4:31 pm
- Location: West Virginia
- Zip Code: 26541
- Tractors Owned: 49 cub
96 John Deere 955
Re: replaceing the pto seal on my cub
by Don McCombs » Wed Jan 09, 2013 11:40 am
Do you have access to a slide hammer? Check with an auto parts store. Sometimes they have loaner tools.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9491
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH 
- Circle of Safety: Y
Re: replaceing the pto seal on my cub
by rohrski » Wed Jan 09, 2013 12:28 pm
Talked too soon, found a bigger bar and it popped out thanks.
- Attachments
-
Cub owner for the last 10 years, such a well engineered piece of equipment.
49 cub
96 JD 955
66 mustang
49 cub
96 JD 955
66 mustang
-
rohrski - Posts: 46
- Joined: Wed Jun 01, 2011 4:31 pm
- Location: West Virginia
- Zip Code: 26541
- Tractors Owned: 49 cub
96 John Deere 955
Re: replaceing the pto seal on my cub
by Don McCombs » Wed Jan 09, 2013 4:57 pm
Make sure everything is clean, smooth and well lubed when you tap the new one back in. Take your time. Little taps. 
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9491
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH - Circle of Safety: Y
Re: replaceing the pto seal on my cub
by rohrski » Wed Jan 09, 2013 6:56 pm
10-4 thanks.
Cub owner for the last 10 years, such a well engineered piece of equipment.
49 cub
96 JD 955
66 mustang
49 cub
96 JD 955
66 mustang
-
rohrski - Posts: 46
- Joined: Wed Jun 01, 2011 4:31 pm
- Location: West Virginia
- Zip Code: 26541
- Tractors Owned: 49 cub
96 John Deere 955
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Arthur Luke, frederick, jim turner, MJM 51 cub, Mr E and 2 guests
|
|