Right hand Lo Boy cut fender from factory

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Re: Right hand Lo Boy cut fender from factory

Postby Clint Carter » Tue Jan 08, 2013 9:29 pm

http://tractors.wikia.com/wiki/File:Int ... y_1967.jpg
I know this is not much of a pic but it looks like it might be the same fender?
Have A Nice Day!
User avatar
Clint Carter
Cub Star!!
Cub Star!!
 
Posts: 482
Joined: Thu Jan 06, 2011 5:46 pm
Location: NC
Zip Code: 27265
Tractors Owned: Ford 2000
78 Cub Fast Hitch Red
78 Cub Red
76 Cub Red
75 Cub (Not Long Stripe) Yellow
70 Cub Yellow Fast Hitch
53 Cub 151 Disk Plow
69 Cub
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Chris D » Wed Jan 09, 2013 7:13 am

Image

Image

Owner modified or factory done I can't confirm but this one has the same cut fender.
Chris D
Cub Star!!
Cub Star!!
 
Posts: 397
Joined: Tue Nov 30, 2010 7:54 pm
Zip Code: 23027
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Boss Hog » Wed Jan 09, 2013 8:50 am

Image

:D
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Rick Prentice » Wed Jan 09, 2013 8:58 am

After seeing all these additional pictures, here's my theory. Someone(like myself) years back made up some fenders to combat the hard-to-get-on Loboy and sold them. It's even possible dealers had access to these fenders somehow, but internet wasn't here yet. I really don't think the IH factory made these because of the mix/match of metal work that was done. IH would have just continued their fancy half rolled edge all the way down. These two suspect fenders almost appear to have either round tube or solid roundstock as an edge and then metalfinished to blend. I could make these fender mods easy, several others on this site could too, like tst..

I still believe the manual pics are of a regular fender, just pencil drawn/viewed bad. A good sketch artist that could pencil draw these two suspect fenders would reveal a more true accurate picture. My feelings, it would look very different.

Mods,Is there any way to transfer/copy all these discussions/pictures over to the main forum so it's not lost a couple weeks down the road when the add runs out, If we all agree to it ??????

Just remember, all this talk is to reveal the truth so we all are comfortable with the results. We may never know the truth or maybe some new information will pop up to confirm things. Digging for the answers is good, long as we don't get our shorts all wadded up in a knot in the process :{_}:

Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Rick Prentice » Wed Jan 09, 2013 9:01 am

I don't see how this picture has that shortfender. If you remember to remove the plate off the bottom, that would reveal a normal length/height fender.
Image
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Boss Hog » Wed Jan 09, 2013 9:03 am

Rick blow the pic up and you can see it better
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Boss Hog » Wed Jan 09, 2013 9:04 am

On further review I will agree with you on the pic I posted egg on my face
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Boss Hog » Wed Jan 09, 2013 9:06 am

by all means move it to the main forum, I feel this is an important issue
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Barnyard » Wed Jan 09, 2013 9:19 am

Rick Prentice wrote:If you remember to remove the plate off the bottom, that would reveal a normal length/height fender.

Not the best of pictures after blowing it up, but the curve can be seen where the bottom plate makes it look square cut.

Image
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17868
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Rick Prentice » Wed Jan 09, 2013 10:01 am

Boss, I know it would be alot to ask, but if you'd take the plate off your fender and position it at the exact same pose/angle as the manual sketch, I really think that would reveal a big difference :shock:

Thanks, Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Boss Hog » Wed Jan 09, 2013 10:04 am

I will do it as soon as I can get a chance
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Clint Carter » Wed Jan 09, 2013 10:57 am

I Know some really good fab people and paint and body people and i have seen a lot of stuff made out of sheet metal, Custom body panels for cars and motorcycles and so on, but i have never seen them not have have to put some kind of body filler in the panels to make them them look straight, to get all the little dings and dents out. From were the paint is missing on boss's fender it dont look like it has any filler in it to me. That is one of the things that makes me think it is not handmade.
Have A Nice Day!
User avatar
Clint Carter
Cub Star!!
Cub Star!!
 
Posts: 482
Joined: Thu Jan 06, 2011 5:46 pm
Location: NC
Zip Code: 27265
Tractors Owned: Ford 2000
78 Cub Fast Hitch Red
78 Cub Red
76 Cub Red
75 Cub (Not Long Stripe) Yellow
70 Cub Yellow Fast Hitch
53 Cub 151 Disk Plow
69 Cub
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Boss Hog » Wed Jan 09, 2013 6:33 pm

Image
Image
Image
Image
Image

I have found out something else, There is some yellow primer on the fender I did not think they primed the fenders and hoods
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Rick Prentice » Wed Jan 09, 2013 7:07 pm

Thanks for taking the time, Boss. I took the two pics and drew an imaginary line from curved points to curved points to show why I don't think the manual pic is your fender. You can see the drastic difference now.
fender1.jpg
fender1.jpg (28.6 KiB) Viewed 194 times

fender2.jpg


Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: Right hand Lo Boy cut fender from factory

Postby Boss Hog » Wed Jan 09, 2013 7:16 pm

Your line is not in the right place At the rear of the fender Look in relation to when the holes are in the fender. And after all Jim said it was a funky drawing :D The line should be where the 3 hole are if they were in the right fender.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9803
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

PreviousNext

Return to Farmall Cub

Who is online

Users browsing this forum: chuck ma, johntexas, rustycub, thiggy and 5 guests